Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Inclinometer IK360

Absolute inclination sensor based on MEMS technology, accuracy ±0.1°

The IK360 inclination sensor is an absolute inclination sensor for accurate angle or inclination measurement based on MEMS technology. Thanks to the robust design up to IP6K9K and the integrated temperature compensation, the inclination sensor can also be used in applications with extreme external conditions. In addition, the free programming of system parameters as well as the teach-in function for measuring range, zero-point setting and direction change provides a high degree of flexibility and easy integration into the overall system. The IK360 is available in a single- and dual-axis version and with a variety of interfaces.

Profile IK360:

  • One-axis or two-axis inclination sensor (0 … 360° oder -80 … +80°)
  • Accuracy ±0.1°; Resolution 0.01°
  • RS232+U, RS232+I, CANopen interfaces
  • Temperature-compensated
  • IP6K9K, IP68 protection category
  • Easy three-point mounting
  • Programmable parameters (resolution, preset, software filter)
  • Teach-in function (Limiting of measurement range, zero-point setting or change of direction)
analog CANopen

Inquire about product/Add to leaflet
Mechanical data
FeatureTechnical dataAdditional information
Housing

PBT glass-fiber reinforced

Weight~0.075 kg
Electrical data
FeatureTechnical dataAdditional information
Operating voltage12 … 30 V DC

current output

10 … 30 V DC voltage output and CANopen
Power input≤0.7 W
Interface

Z =

0 … 10 V

, 0° = 0 V, load ≤1 mA

RS232+U0-10V (1 axis)

X and Y =

0 … 10 V

, 0° = 5 V, load ≤1 mA

RS232+U0-10V (2 axes)

Z =

4 … 20 mA

, 0° = 4 mA, load ≤270 R

RS232+I (1 axis)

X and Y =

4 … 20 mA

, 0° = 12 mA, load ≤270 R

RS232+I (2 axes)

according to ISO 11898, galvanically isolated

CANopen (profile 410)

Accuracy0.1°

at -10 ... 40 °C

Cut-off frequency100 Hz

(without filter)

System data
FeatureTechnical dataAdditional information
Resolution0.01°
Measuring range360°

1 axis

X and Y =

-80 … 80°

2 axes

Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature-40 … 85 °C
Relative humidity100 % condensation admissible
EMCEN 61000-6-2 interference resistance / immission
EN 61000-6-4

emitted interference / emission

Protection categoryIP68

EN 60529, fitted with suitable mating connector

IP6K9K ISO 20653, fitted with suitable mating connector
Shock resistance≤1000 m/s2, 6 ms EN 60068-2-27
Vibration resistance1.5 mm, 10 … 58 Hz EN 60068-2-6
≤200 m/s2, 58 Hz … 2 kHz EN 60068-2-6
Inclinometer IK360
Pin assignment

Signal
(1 axis) RS232 + analog

Signal
(2 axes) RS232 + analog

Signal CAN

Pin

+UB+UBCAN_GND1
RXDRXD+UB2
TXDTXDGND3
GNDGNDCAN_H4
Z-axis output U/IX-axis output U/ICAN_L5
Analog Input
Preset oder SET1 (Teach-In)
Analog Input
Preset oder SET1 (Teach-In)
-6
N.C.Y-axis output U/I-7
Analog Input Inverse Direction or SET2
(Teach-In)
Analog Input Inverse Direction or SET2
(Teach-In)
-8
Scope of delivery
  • IK360
  • Fastening set
Ordering table
Feature Order data Specifications Additional information
Number of axes
A1
0 … 360°
2
X -80 … +80°, Y -80 … +80°
 
Interface
BRS232+U0-10V
RS232, 0 … 10 V voltage output
RS232+I
RS232, 4 … 20 mA current output
CAN
CANopen
 
Ordering key
IK360
-
A
-
B
additional accessoriesOrdering key
Mating connector,

5-pole, socket

84109
Mating connector, 5-pole, angle socket83006
Mating connector,

8-pole, socket

83525