Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Subsidiary: SIKO Products Asia Pte Ltd 19A, St. Michael's Road #06-05 Singapore 328003 Singapore Phone+65 62979733

28. March 2019

Wire-actuated encoder SG61

robust design with 6000 mm measurement length

SIKO GmbH from Buchenbach, the specialist in the field of wire-actuated sensors, presents the new SG61 wire-actuated encoder, which can be used for measuring lengths up to 6 m. Based on 30 years of experience in development and production, a wire-actuated sensor has been designed that impresses with its compactness, sturdiness and flexibility.
 
Compact and robust
The measurement length and a housing that is as compact as possible are important factors when choosing sensors in intralogistics and for mobile machines.
The new SG61 wire-actuated encoder is truly eye-catching with an installation depth of 70 mm x 85 mm x 105 mm and no compromises in terms of sturdiness! The robust aluminum housing, coupled with impact-resistant plastic, survives even the harshest of operating conditions. Factors such as temperatures between -40 and +80° C, high shock and vibration loads, dirt, dust and water pose no limitations for the wire-actuated encoder.
 
For outdoor applications in low temperature ranges, there is also a variant with integrated water drain holes – this prevents the problem of water freezing in minus temperatures and increases the service life.
 
Flexible application thanks to variety of interfaces and Wire-Flex technology
The flexible 58 mm flange system of the SG61 makes it possible for the customer to decide which interface should be used. Almost any interface is compatible with the wire-actuated encoder, whether it’s an incremental interface such as HTL or TTL, or an absolute interface such as analog, SSI, CANopen, SEA J1939, CANopen Safety, Fieldbus or Ethernet.
 
And that’s not where the flexibility of the wire-actuated sensor ends: the wire outlet also provides all of the advantages of Wire-Flex technology.
This makes it possible to ensure that the wear on the wire is kept to a minimum, even if it pulls out at an angle. The conical shape of the wire outlet and the various types of wire mean that any deposits on the wire can be removed easily.  Mechanical tolerances for the machine or vehicle can be offset automatically, even in harsh ambient conditions, which preserves the function and service life of the system.
 
Suitable for position detection
The SG61 encoder provides increased safety in combination with the redundant SIKO WV58MR safety rotary encoder and can be used in the overall system in applications up to performance level d (PLd). This is made possible by the mechanical design and software specially designed for the purpose. In addition to electronics, the mechanics are also monitored, which means that dangerous conditions can be detected at an early stage – making it particularly suitable for mobile machines for any application.

Universally applicable wire-actuated encoder with measuring lengths of max. 6000 mm, robust construction as well as precise and safe wire guidance, prepared for attaching the most diverse types of rotary encoders with a 58 mm standard flange.

Profile SG61:

  • Robust design
  • Easy mounting
  • Measurement lengths up to max. 6000 mm
  • Incremental or absolute encoder
  • Also available as a safety version in combination with WV58MR rotary encoder
  • High flexibility thanks to free choice of rotary encoders with 58 mm standard flange
  • Various wire types
  • With PURE.MOBILE technology
To the product page
Inquire about product/Add to leaflet
Wire-actuated encoder SG61

share me