Signal | E1 | EX, E3, E4 |
---|---|---|
GND | gray | 1 |
A | yellow | 2 |
B | white | 3 |
0/I | green | 4 |
+UB | brown | 5 |
nc | 6 | |
nc | 7 |
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com
Feature | Technical data | Additional information |
---|---|---|
Shaft | black-finshed steel | |
Housing | zinc, die-cast | |
Speed | ≤6000 rpm | IP64 |
≤3000 rpm | IP65 | |
Moment of inertia | ~28.5 x 10-6 kgm2 | W01 shaft design |
~58.5 x 10-6 kgm2 | W02 shaft design | |
Starting torque | ≤6 Ncm at 20 °C | IP64 |
≤10 Ncm at 20 °C | IP65 | |
Shaft load rating | 1400 N axial | |
5600 N radial | ||
Cable sheath | PVC | |
Weight | ~0.75 kg |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | 10 … 30 V DC | reverse polarity protected |
Current consumption | typical <40 mA | without load (AB0 output signals) |
Output signal level high | UB -2 V | |
Output signal level low | ≤1 V at 40 mA | |
Pulse frequency | ≤80 kHz | |
Phasing | 90° ±30° | |
Load | ±40 mA short-circuit proof | max. adm. |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | 10 … 30 V DC | reverse polarity protected |
Current consumption | typically <40 mA | without load (AB0 output signals) |
Output signal level high | UB -2 V | |
Output signal level low | ≤1 V at 40 mA | |
Pulse frequency | ≤80 kHz | |
Phasing | 90° ±30° | |
Load | ±40 mA short-circuit-proof | max. adm. |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | 5 V DC ±5 % | without reverse polarity protection |
Current consumption | typically <40 mA | without load (AB0 output signals) |
Output signal level | RS422 A spec. | |
Pulse frequency | ≤50 kHz | |
Phasing | 90°±30° | |
Load | ±40 mA short-circuit-proof | max. adm. |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | 10 … 30 V DC | without reverse polarity protection |
Current consumption | typically <40 mA | without load (AB0 output signals) |
Output signal level | RS422 A spec. | |
Pulse frequency | ≤50 kHz | |
Phasing | 90° ±30° | |
Load | ±40 mA short-circuit-proof | max. adm. |
Feature | Technical data | Additional information |
---|---|---|
Ambient temperature | 0 … 60 °C | |
Storage temperature | -20 … 85 °C | |
Protection category | IP64, IP65 | EN 60529 |
Shock resistance | 2000 m/s2, 6 ms | EN 60068-2-27 |
Vibration resistance | 100 m/s2, 50 Hz | EN 60068-2-6 |
Signal | E1 | EX, E3, E4 |
---|---|---|
GND | gray | 1 |
A | yellow | 2 |
B | white | 3 |
0/I | green | 4 |
+UB | brown | 5 |
nc | 6 | |
nc | 7 |
Signal | E1 | EX, E3, E4 |
---|---|---|
A | yellow | A |
B | white | B |
0 | green | C |
/A | pink | D |
/B | blue | E |
I | violet | F |
GND | gray | G |
GND | black | H |
+UB | brown | J |
+UB | red | K |
nc | L | |
nc | M |
Signal | E1 | EX, E3, E4 |
---|---|---|
GND | gray | 1 |
A | yellow | 2 |
B | white | 3 |
nc | 4 | |
+UB | brown | 5 |
/A | pink | 6 |
/B | blue | 7 |
Signal | E1 | EX, E3, E4 |
---|---|---|
A | yellow | A |
/A | green | B |
GND | gray | C |
+UB | pink | D |
B | white | E |
/B | brown | F |
+SUB only with LD5 | red | G |
SGND only with LD5 | blue | H |
0 | red-blue | J |
O | gray-pink | K |
GND | black | L |
+UB | violet | M |
Feature | Order data | Specifications | Additional information |
---|---|---|---|
Output signal | A... | AXX, ABX, ABO, ABI, AXO, AXI | |
Pulses/revolution | B... | 1, 2, 5, 10, 20, 25, 30, 36, 40, 50, 60, 70, 80, 90, 100, 125, 150, 200, 220, 250, 300, 360, 400, 500, 512, 585, 600, 750, 800, 900, 1000, 1024 | |
... | others on request | ||
Type of connection | CEX | without cable | |
E1 | open cable ends | ||
E3 | right angle plug | ||
E4 | plug | ||
Cable length | D... | 00.5, 02.0 ... 50 m, in intervals of 0.1 m | |
OK | without cable | ||
Mounting type | E1 | with blind hole | |
2 | with flange | ||
Output circuit | FPP | push-pull | |
OP | push-pull with inverted signals | ||
LD | line driver | ||
LD24 | line driver, 24 V | ||
Shaft design/diameter | GW01 | 20 mm | ball bearing and lock screw |
W01/RH12 | with reducing bush 12 mm | ball bearing and lock screw | |
W01/RH14 | with reducing bush 14 mm | ball bearing and lock screw | |
W01/RH15 | with reducing bush 15 mm | ball bearing and lock screw | |
W01/RH16 | with reducing bush 16 mm | ball bearing and lock screw | |
W02 | 20 mm | ball bearing and lock ring | |
W02N | 20 mm, stainless steel | ball bearing and lock ring | |
Bearing | HMS | IP64, high-precision packed sealing gap | |
RS | IP65, increased bearing sealing | ||