Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Absolute encoder WH58MR

Absolute redundant safety rotary encoder

open expert video
The WH58MR rotary encoder is a magnetic safety rotary encoder with redundant position detection and hollow shaft, which has been specially developed for use in mobile machines. It can be used in safety-critical applications – up to performance level PLd.  Thanks to its particularly robust design, an optionally redundant CANopen or CANopen Safety interface, it is ideally suited for tough conditions in mobile machines.

Profile WH58MR:

  • Absolute redundant safety rotary encoder
  • Interface CANopen Safety or CANopen redundant
  • Suitable for applications up to Performance Level PLd
  • Hollow shaft to ø 15 mm
  • Salt-spray resistant housing available
  • High electro-magnetic compatibility
  • IP67 protection class
  • With PURE.MOBILE technology
CANopen Functional Safety PLd CANopen Safety PURE.MOBILE E1

Inquire about product/Add to leaflet
Mechanical data
FeatureTechnical dataAdditional information
Shaft

stainless steel

Flangealuminum
Housing

die-cast aluminum

CDP-coated
Speed≤3000 rpm
Moment of inertia≤110 gcm2
Starting torque≤3 Ncm at 20° C
Shaft load rating≤80 N

radial

≤40 N axial
Cable sheathPVC E1 connection type
Electrical data
FeatureTechnical dataAdditional information
Operating voltage8 … 36 V DC reverse polarity protected
Current consumption20 mA at 36 V, per encoder
28 mA at 24 V DC, per encoder
76 mA at 8 V, per encoder
Power input≤800 mW

without load, per encoder

Parameter storage105 cycles also applies to calibration operations
Status display

2x tricolor LEDs (red/green/yellow)

device status/CAN status

Power rating±60 V CAN interface
Interfaceaccording to ISO 11898, not galvanically isolated CANopen, CiA 301, CiA 303, CiA 305, CiA 406
according to ISO 11898-1/2, not galvanically isolated CANopen Safety, CIA 301, CIA 303, CIA 305, CIA 406, EN 50325-5
Address1 ... 127 Node ID, via SDO or Layer Setting Service (LSS)
Baud rate20 kbit/s
50 kbit/s
125 kbit/s
250 kbit/s
500 kbit/s
800 kbit/s
1 Mbit/s
Cycle timetypical 1.5 ms
Starting time<150 ms
Type of connection1x M12 connector (A-coded) 5-pole, 1x pin (E12E connection type), fieldbus and supply internally connected
2x M12 connector (A-coded) 5-pole, 1x pin; 1x socket (E12 connection type), fieldbus and supply internally connected
2x M12 connector (A-coded) 5-pole, 2x pin (E12EE  connection type), fieldbus and supply internally separated
open cable end E1 type of connection, fieldbus and supply internally connected
System data
FeatureTechnical dataAdditional information
Scanning

magnetic

Resolution14 bit singleturn, 16384 steps/revolution
Measuring range1 revolution(s) singleturn
4096 revolution(s)
Failure rate206.1 year(s) at 40° C (MTTF) acc. to SN29500
580 year(s)

at 60° C (MTTFd) each channel

196 AT at 60° C (PFH) 1 FIT = 1.0 E – 09 1/h
Error detection77 %

at 60° C (DCavg) according to ISO13849-1, Appendix E.2

ApprovalE1 UN ECE R10 Approval No.: E1*10R05/01*8898*00
Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature-40 … 85 °C
Storage temperature-40 … 85 °C
Relative humidity100 %

condensation admissible

EMC

EN 61000-6-2

interference resistance / immission

EN 61000-6-4

emitted interference / emission

ISO 7637-1, -2 transient pulses
ISO / TR 10605 electrostatic discharge (ESD)
Protection category

IP67

EN 60529

Salt spray testseverity level 3 EN 60068-2-52 (ambient condition SN)
Shock resistance500 m/s2, 11 ms

EN 60068-2-27, half-sine, 3 axes (+/-), each 3 shocks

Vibration resistance100 m/s2, 10 … 2000 Hz EN 60068-2-6, 3 axes, each 10 cycles
Absolute encoder WH58MR
Option, PURE.MOBILE sensor module
inclination sensor
FeatureTechnical dataAdditional information
Resolution 0.01°  
Measurement range 360° 1 axis
  ±180° 1 axis
Accuracy ±0.1° at 20° C
  ±0.8° over the entire temperature and max. measurement range
Zero point accuracy drift max. ±0.02°/K  
Zero point accuracy drift typical ±0.008°/K  
Cut-off frequency 10 Hz  
Pin assignment
E12, E12E, E12EE
SignalPIN
CAN_GND 1
+UB 2
GND 3
CAN_H 4
CAN_L 5
E1
SignalCable color E1
CAN_GNDwhite
+UBbrown
GNDgreen
CAN_Hyellow
CAN_Lgray
Scope of delivery
  • WH58MR
  • Quick Start Guide
Ordering table
Feature Order data Specifications Additional information
Interface/protocol
ACAN
CANopen
CANs
CANopen Safety
 
Number of revolutions
B1
singleturn
4096
12 bit
 
Hollow shaft/diameter
C...
10, 12, 15 in mm
 
Ambient conditions
DS
standard
SN
salt spray tested housing
 
Type of connection
EE1
open cable ends
E12
Bus IN/Bus OUT2x M2x M12, 5-pin A-coded, fieldbus and supply internally connected
E12E
Bus IN1x M12, 5-pin A-coded, fieldbus and supply internally connected
E12EE
Bus IN/Bus IN2x M12, 5-pin A-coded, fieldbus and supply internally connected
 
Cable length
F...
01.0, 02.0, 03.0, 05.0, 10.0 in m
OK
without cable
 
Option
GO
without
DIP
rotary switch, address, baud rateonly with CANopen, CANopen Safety
IK1
inclination sensor, 1 axis
IK1R
redundant inclination sensor, 1 axis
 
Ordering key
WH58MR
-
A
-
16384
-
B
-
C
-
D
-
IP67
-
R
-
E
-
F
-
SW
-
G
additional accessoriesOrdering key
Mating connector,

5-pole, socket

84109
Mating connector, 5-pole, angle socket83006
Bus terminating connector,

5-pole, pin

82815