Draw-wire encoder SG5
Miniature wire-actuated encoder with 600 mm measurement length
Miniature wire-actuated encoder designed to capture linear measurement distances. Its measuring length of 600 mm is very long considering its small size.SG5 is universally usable thanks to its standardized interfaces.
- Very small design
- Universally applicable thanks to standardized interfaces
- Easy mounting
- Measurement lengths up to max. 600 mm
- Potentiometer, voltage or power output
- Housing made of reinforced plastic
Technical drawing
Technical Specifications
Mechanical data
Electrical data
System data
Ambient conditions
Feature
Technical Specifications
Enhancement
Weight
~0.06
 kg
Housing
 reinforced plastic
Wire design
ø0.36
 mm
rustproof stainless steel, plastic-coated
Extension force
≥3
 N
Absolute accuracy
±0.35
 %
relating to measuring length (mm)
Cable length
≤15
 m
P10 encoder type
≤30
 m
MWI encoder type
≤20
 m
MWU encoder type
Geber Potentiometer
Feature
Technical Specifications
Enhancement
Power rating
2
 W
 at 70 °C
resistance
10
 kΩ
Resistance tolerance
±5
 %
Linearity tolerance
±0.25
 %
Messwandler, Stromausgang
Feature
Technical Specifications
Enhancement
Operating voltage
24 V DC ±20 %
 at load 500 Ω
Output current
4 … 20 mA
Messwandler, Spannungsausgang
Feature
Technical Specifications
Enhancement
Operating voltage
15 … 28 V DC
 at 36 mA without load
Output voltage
0 … 10 V DC
ILoad ≤10 mA
Load
≤10
 mA
* Transducers enable optimal adaptation of output current or output voltage to the measuring range. The measuring transformer is factory preset so that an output signal of 4 … 20 mA (MWI) or 0 … 10 V DC (MWU) is available between the start and end points of the measuring range.
Feature
Technical Specifications
Enhancement
Repeat accuracy
±0.15
 mm
Travel speed
≤800
 mm/s
Feature
Technical Specifications
Enhancement
Ambient temperature
-10 … 80 °C
Relative humidity
condensation inadmissible
Protection category
 IP50 (encoder part)
EN 60529, with cable connected in the factory
More information
pin assignment
Potentiometric outputs P10
Signal |
E1 (terminal) |
Po |
brown |
Pe |
white |
S |
green |
MWI transducer
Signal |
Cable color |
I+ |
brown |
I- |
white |
MWU transducer
Signal |
Cable color |
+24 V DC |
brown |
GND |
white |
Uout |
green |
Hint for mounting
When securing the wire it must be ensured that the wire is straight and vertical in relation to the wire outlet. Recommendation: Only select the starting position after an unwound length of approx. 5 mm. This prevents the wire hitting the end stop when it is rewound.
Symbolic representation
Purchase order
Product configuration
Feature
Select specifications
Enhancement
Select your specifications:
Measuring range
300M
Transducer setting, only with MWI or MWU encoder types
encoder type
P10
Cable length
OK
01.0
15.0 m, in intervals of 1 m
Accessories
Scope of delivery
- SG5