Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Electronic position indicator DE10

For large shaft diameters

The DE10 is a freely programmable and battery-powered position indicator. The position indicator DE04 provides maximum flexibility, since the always same basic device can be parameterized to the desired spindle pitch, display accuracy and reading position in an application-specific manner. Parameterization is conveniently performed via programming software via an external interface.

Profile DE10:

  • Freely programmable electronic digital display for length or angular measurement
  • Freely programmable via the ProToolDE programming software
  • Hollow shaft, max. Ø 30 mm
  • LCD display with 5 digits and special characters
  • Digit height approx. 12 mm
  • Reset, incremental measurement, offset via keyboard
  • Long battery life
  • Easy battery change without dismantling of the device

Inquire about product/Add to leaflet
Mechanical data
FeatureTechnical dataAdditional information
Shaftblack-finished steel (supported in friction bearings) (≤ ø30H7)
Housing

plastic

Speed≤600 rpm (100 % ED)
Weight~0.1 kg
Electrical data
FeatureTechnical dataAdditional information
Battery

lithium coin cell, 3 V, CR2032 type

~2-year service life

lithium coin cell, 3 V, CR2477 type

~8-year service life

Display/display range

5-digit LCD 7-segment, ~8 mm height

-19999 ... 99999
Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature-10 … 60 °C
Storage temperature-30 … 80 °C
EMCEN 61000-6-2 interference resistance / immission
EN 61000-6-4 emitted interference / emission
Protection categoryIP51 EN 60529
Shock resistance300 m/s2, 15 ms EN 60068-2-27
Vibration resistance100 m/s2, 5 … 150 Hz EN 60068-2-6
200 m/s2, 100 Hz … 2 kHz EN 60068-2-6
Electronic position indicator DE10
Scope of delivery
  • DE10
  • Mounting instructions
Ordering table
Ordering information

Hint: Texts highlighted in orange color are order characteristics.

Hint Please note that the value displayed (=measured value per revolution / display divisor) must be at least 2!

Feature Order data Specifications Additional information
Mounting position*
A02
horizontal spindle
04
vertical spindle
 
Measured value per revolution*
B...
00002 ... 90000 see display value calculation
W3600
angle mode 0° ... 360°, resolution 0.1°only with comma position "1"
Z3600
angle mode -180° ... +180°, resolution 0.1°only with comma position "1"
 
Decimal place*
C0
0 = 00000
1
1 = 0000.0
2
2 = 000.00
3
3 = 00.000
 
Display divisor*
D...
1, 10, 100, 1000 see display value calculation
 
Counting direction*
Ei
clockwise ascending values
e
counter-clockwise ascending values
 
Key pad operation
FD
direct zeroing*
V
zeroing delayed by 5 s*
K
only incremental measurement function
OF
without function keys
 
Hollow shaft/diameter
G30
ø30 mm
20
ø20 mm
...
RH16, RH22, RH24, RH25, RH25.4, RH26 reducing bushes
others on request
 
Color
HO
orange RAL 2004
S
black RAL 9005
 
Battery
IB2
~2 years service life
B8
~8 years service lifeobserve technical drawing
 

*Programmable via ProTool DE programming software

Ordering key
DE10
-
A
-
B
-
C
-
D
-
E
-
F
-
G
-
H
-
A
-
BP
-
I

share me

Contact

Anita Senentz

Anita Senentz
Scan the code with a suitable APP to include the contact into your phone.

Download vCard