Signal | Cable color |
---|---|
Po | brown |
Pe | white |
S | green |
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 [email protected]
Adaptation to various measurement distances owing to a wide range of gear ratios
Feature | Technical data | Additional information |
---|---|---|
Shaft | black-finished steel | |
Housing | plastic | |
Gear ratio | 0.2 … 128 | |
Speed | ≤500 rpm | depending on the transmission |
Potentiometer service life | 1 x 106 revolution(s) |
Feature | Technical data | Additional information |
---|---|---|
Power rating | 1 W at 70 °C | ≤30 V |
Resistance | 1, 5, 10 kΩ | |
Resistance tolerance | ±10 % | |
Standard terminal resistance | 0.5 % | |
Linearity tolerance | ±1 % | |
Design | hybride |
Feature | Technical data | Additional information |
---|---|---|
Power rating | 2 W at 70 °C | ≤30 V |
Resistance | 1, 5, 10 kΩ | |
Resistance tolerance | ±5 % | |
Standard terminal resistance | 0.2 % | |
Linearity tolerance | ±0.25 % | |
Design | wire |
Feature | Technical data | Additional information |
---|---|---|
Power rating | 2 W at 70 °C | ≤30 V |
Resistance | 1, 5, 10 kΩ | |
Resistance tolerance | ±5 % | |
Standard terminal resistance | 0.2 % | |
Linearity tolerance | ±0.25 % | |
Design | hybride |
Feature | Technical data | Additional information |
---|---|---|
Power rating | 2 W at 70 °C | ≤30 V |
Resistance | 5 kΩ | |
Resistance tolerance | ±5 % | |
Standard terminal resistance | 0.2 % | |
Linearity tolerance | ±0.1 % | |
Design | hybride |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | 24 V DC ±20 % | |
Output current | 4 … 20 mA | with ≤500 Ω load |
Feature | Technical data | Additional information |
---|---|---|
Measuring range | 340° ±5° (mechanical full-length) | potentiometer type 01 |
3600° +10° | potentiometer types 02, 03, 03/0.1 |
Feature | Technical data | Additional information |
---|---|---|
Ambient temperature | 0 … 80 °C | |
Relative humidity | condensation inadmissible | |
EMC | EN 61000-6-2 | interference resistance / immission |
EN 61000-6-4 | emitted interference / emission | |
Protection category | IP52 | EN 60529 |
Feature | Order data | Specifications | Additional information |
---|---|---|---|
Gear ratio | A... | 0.2, 0.25, 0.333, 0.5, 1, 2, 3, 4, 6, 7, 9, 10, 12, 16, 20, 20.3636, 24, 28, 30, 36, 48, 68, 112, 128 | |
others on request | |||
Torque pin/form | BA | form A, cylindrical pin | |
B | form B, for tolerance compensation | ||
Potentiometer type | C01 | 1 helix, hybrid | |
02 | 10 helices, wire | ||
03 | 10 helices, hybrid | ||
03/0.1 | 10 helices, hybrid, linear tolerance ±0.1 % | only at resistance 5 | |
Resistance | D1 | potentiometer 1 kΩ | |
5 | potentiometer 5 kΩ | ||
10 | potentiometer 10 kΩ | ||
Transducer | Emit | with | only only for resistance 10 and potentiometer type 02 or 03 |
without | |||
Sense of rotation | F | no information required | only for resistance 1, 5, 10 |
e | counter-clockwise ascending values | only for MWI analog output | |
i | clockwise ascending values | only for MWI analog output | |
Cable length | G... | 00.2 ... 15.0 m, in intervals of 1 m | |