Type | Hub | øD | ødv | ødx | ød1 | ød2 | ød3 | a | b | c | e | f | h | Suitable for |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HG10 | synthetic | 98 | 6 … 16H9 | 16 | 30 | 93 | 56 | 31.5 | 18.7 | 22.8 | 20.7 | 18.7 | S80/1; SZ80/1 | |
metall | 98 | 5.8 | 6 … 16H7 | 25.5 | 35 | 93 | 59 | 31.5 | 18.2 | 25.8 | 18 | 21.7 | S80/1; SZ80/1 |
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com
Feature | Technical data | Additional information |
---|---|---|
Material | plastic | |
Weight | 0.2 kg |
Type | Hub | øD | ødv | ødx | ød1 | ød2 | ød3 | a | b | c | e | f | h | Suitable for |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HG10 | synthetic | 98 | 6 … 16H9 | 16 | 30 | 93 | 56 | 31.5 | 18.7 | 22.8 | 20.7 | 18.7 | S80/1; SZ80/1 | |
metall | 98 | 5.8 | 6 … 16H7 | 25.5 | 35 | 93 | 59 | 31.5 | 18.2 | 25.8 | 18 | 21.7 | S80/1; SZ80/1 |
ødv =
d prebored
Handwheel type | HG10 | |||
---|---|---|---|---|
Bore dH7 | 6 … 8 | 9, 10 | 11, 12 | 13 …16 |
Groove width with keyway JS9 | 3 | 4 | 5 | |
Pin hole | 3.8/10 | 3.8/10 | 3.8/10 | 4.8/10 |
Hub thread without keyway JS9 | M4/10 | M4/10 | M4/10 | M6/10 |
Hub thread with keyway JS9 | M3/10 | M3/10 | M4/10 |
* only possible with metal hub;
Texts highlighted in orange color are ordering features
Feature | Order data | Specifications | Additional information |
---|---|---|---|
Hub material | AA | aluminium | |
K | plastic | ||
VA | stainless steel | ||
Bore diameter | B5.8 | prebored | |
... | 06 ... 16 mm, in steps of 1 mm | ||
Feather key groove | COP | without keyway | |
JS9 | light seat | according to DIN 6885/1 T1, only with hub material "VA" or "A" | |
P9 | tight fit | according to DIN 6885/1 T1, only with hub material "VA" or "A" | |
Pinhole | DOS | without pin hole | |
… | diameter "øl"/measure "f" (e.g. 3.8/12) | see table Special processing, depending on the handwheel type, only if keyway is "OP", only if hub thread is "ONG" | |
others on request | |||
Hub thread | EONG | without hub thread | |
… | thread "n"/measure "f" (e.g. M4/12) | see table Special processing, depending on the handwheel type, only if pin hole is "OS", only with hub material "VA" or "A" | |
others on request | |||
Tapered hub | FOAN | without turned hub | |
others on request | |||
Position indicator | GPM | position indicator mounted | separate ordering of a position indicator required! |
PS | position indicator separate | separate ordering of a position indicator required! | |