Draw-wire encoder SG10
Small design with 2000 mm measurement length
Miniature wire-actuated encoder for capturing measurement distances with a maximum measuring length of 2000 mm.
- Compact design
- Universally applicable thanks to standardized interfaces
- Easy mounting
- Measurement lengths up to max. 2000 mm
- Potentiometer, voltage, power output or incremental encoder
- Housing made of reinforced plastic
Ben
King
Inside Sales
August
Meyers
Manager Business Unit Mobile Automation
Technical drawing
Technical Specifications
Mechanical data
Electrical data
System data
Ambient conditions
Feature
Technical Specifications
Enhancement
Weight
~0.2
kg
Housing
reinforced plastic
Wire design
ø0.45
mm
rustproof stainless steel, plastic-coated
ø0.45
mm
rustproof stainless steel
Extension force
≥2
N
Measured distance/ rope drum revolution
100
mm
Cable length
≤30
m
P10 + MWI encoder type
≤20
m
MWU encoder type
Geber Potentiometer
Feature
Technical Specifications
Enhancement
Power rating
1.5
W
at 70 °C
resistance
10
kΩ
Resistance tolerance
±5
%
Linearity tolerance
±0.25
%
±0.1
%
MWI/0,1 encoder type
Messwandler, Stromausgang
Feature
Technical Specifications
Enhancement
Operating voltage
24 V DC ±20 %
at load 500 Ω
Output current
4 … 20 mA
Messwandler, Spannungsausgang
Feature
Technical Specifications
Enhancement
Operating voltage
15 … 28 V DC
at 36 mA without load
Output voltage
0 … 10 V DC
Load
≤15
mA
* Transducers enable optimal adaptation of output current or output voltage to the measuring range. The measuring transformer is factory preset so that an output signal of 4 … 20 mA (MWI) or 0 … 10 V DC (MWU) is available between the start and end points of the measuring range.
Feature
Technical Specifications
Enhancement
Repeat accuracy
±0.15
mm
Travel speed
≤800
mm/s
Feature
Technical Specifications
Enhancement
Ambient temperature
-10 … 80 °C
without transducer
0 … 50 °C
with transducer
Protection category
IP50 (encoder part potentiometer)
EN 60529
IP54 (incremental)
EN 60529
More information
pin assignment
Potentiometric outputs P10
|
Signal |
E1 (terminal) |
|
Po |
brown |
|
Pe |
white |
|
S |
green |
MWI transducer
|
Signal |
Cable color |
|
I+ |
brown |
|
I- |
white |
MWU transducer
|
Signal |
Cable color |
|
+24 V DC |
brown |
|
GND |
white |
|
Uout |
green |
Hint for mounting
When securing the wire it must be ensured that the wire is straight and vertical in relation to the wire outlet. Recommendation: Only select the starting position after an unwound length of approx. 5 mm. This prevents the wire hitting the end stop when it is rewound.
Symbolic representation
Purchase order
Ordering information
For measuring range 2000 I, the rotary encoder IV2800 mounted directly from the factory must be ordered separately.
Product configuration
Feature
Select specifications
Enhancement
Select your specifications:
Measuring range
300
in mm
encoder types Ω, I, U (potentiometer and transducer)
only with encoder type S5, S5R
wire design
S
encoder type
P10
Cable length
00.5
with encoder type P10 or MWI/MWU
01.0
20.0 m, in intervals of 1 m
with encoder type P10 or MWI/MWU
at measuring range 2000 I
Accessories
Scope of delivery
- SG10