Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko.de
Subsidiary: SIKO Products Asia Pte Ltd 19A, St. Michael's Road #06-05 Singapore 328003 Singapore Phone+65 62979733 info@siko.sg
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko.de
Subsidiary: SIKO Products Asia Pte Ltd 19A, St. Michael's Road #06-05 Singapore 328003 Singapore Phone+65 62979733 info@siko.sg
| Feature | Technical data | Additional information |
|---|---|---|
| Shaft | black-finshed steel | |
| Housing | reinforced plastic | |
| Speed | ≤600 rpm | W01 shaft design |
| ≤6000 rpm | W02, W04 shaft design | |
| Moment of inertia | ~10.5 x 10-6 kgm2 | W01 shaft design |
| ~9.5 x 10-6 kgm2 | W02 shaft design | |
| ~9 x 10-6 kgm2 | W04 shaft design | |
| Starting torque | ≤15 Ncm at 20 °C | W01 shaft design |
| ≤1.5 Ncm at 20 °C | W02, W04 shaft design | |
| Shaft load rating | 10 N axial | W01 shaft design |
| 20 N radial | W01 shaft design | |
| 25 N axial | W02, W04 shaft design | |
| 50 N radial | W02, W04 shaft design | |
| Cable sheath | PVC or PUR | |
| Weight | ~0.14 kg |
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 10 … 30 V DC | reverse polarity protected |
| Current consumption | typical <50 mA | without load (AB0 output signals) |
| Output signal level high | UB -2 V, at 20 mA | |
| Output signal level low | ≤1 V at 20 mA | |
| Pulse frequency | ≤25 kHz | |
| Phasing | 90° ±30° | |
| Load | ±40 mA short-circuit proof | max. adm. |
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 10 … 30 V DC | reverse polarity protected |
| Current consumption | typically <50 mA | without load (AB0 output signals) |
| Output signal level high | wiring-dependent | |
| Output signal level low | ≤0.1 V DC | |
| Pulse frequency | ≤25 kHz | |
| Phasing | 90° ±30° | |
| Load | ±50 mA | max. adm. |
| Feature | Technical data | Additional information |
|---|---|---|
| Ambient temperature | 0 … 60 °C | |
| Storage temperature | -20 … 80 °C | |
| Protection category | IP54 | EN 60529 |
| Shock resistance | 2000 m/s2, 6 ms | EN 60068-2-27 |
| Vibration resistance | 100 m/s2, 50 Hz | EN 60068-2-6 |
The max. permissible pulses/revs. must not be exceeded by the output signals.
| Feature | Order data | Specifications | Additional information |
|---|---|---|---|
| Output signals | A... | AXX, ABX, AB0, ABI | |
| Pulses/revolution | B... | 1, 2, 5, 10, 20, 25, 36, 40, 50, 60, 70, 80, 100, 125, 150, 180, 200, 220, 240, 250, 300, 360, 400, 500, 600, 1000, 1024 | |
| others on request | |||
| Cable sheath | CPUR | PUR, oil-resistant | |
PVC | PVC | ||
| Type of connection | DE1 | open cable end | |
E6 | cable coupler with cable extension | ||
E6X | cable coupler | ||
| Cable length L | E... | 00.3, 02.0 ... 40 m, in intervals of 1 m | only PVC |
... | 00.3, 02.0, 03.0 | only PUR | |
| Cable length L2 | F... | 00.3, 02.0 ... 15 m, in intervals of 1 m | only PVC |
... | 00.3, 02.0, 03.0 | only PUR | |
| Mounting type | G1 | with blind borehole | |
2 | with mounting plate | ||
| Output circuit | HPP | push-pull | |
OC | open collector | ||
| Shaft design | IW01 | setscrew/friction bearing | |
W02 | clamping ring/ball bearing | ||
W04 | setscrew/ball bearing | ||
| Hollow shaft/diameter | J20 | 20 mm | with W01 |
... | 14, 15 mm | with W02 | |
... | 10, 12 mm | with W04 | |
IG06 - A - B - C - D - E - F - G - H - I - J
(1.08 MB)
