A, Sensor/tape reading distance | ≤2 mm |
B, Lateral offset | ±2 mm |
C, Alignment error | ±3° |
D, Longitudinal inclination | ±1° |
E, Lateral inclination | ±3° |
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 [email protected]
Feature | Technical data | Additional information |
---|---|---|
Housing | aluminum red | L design |
steel | F design | |
Sensor/band reading distance | 0.1 … 2 mm | |
Cable sheath | PVC | 6-wire ø3.55-0.3 mm (E16 type of connection) |
PUR | 6-wire ø5.2 mm (E15 type of connection) | |
Cable bending radius | >17 mm (static) | E16 type of connection |
≥52 mm (dynamic) | E15 type of connection |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | supply via measurement display / downstream electronic unit | |
Current consumption | supply via measurement display / downstream electronic unit | |
Type of connection | flat connector | 8-pole, 1x pin (E16) |
M8 plug connector | 6-pole, 1x pin (E15) |
Feature | Technical data | Additional information |
---|---|---|
System accuracy | depending on downstream electronic unit | |
Repeat accuracy | depending on downstream electronic unit | |
Travel speed | depending on downstream electronic unit |
Feature | Technical data | Additional information |
---|---|---|
Ambient temperature | 0 … 60 °C | |
Storage temperature | -20 … 70 °C | |
Relative humidity | 100 % | Betauung zulässig (Sensorkopf) |
Protection category | IP67 | EN 60529 (sensor head) |
Shock resistance | 2000 m/s2, 11 ms | EN 60068-2-27 |
Vibration resistance | 200 m/s2, 50 Hz … 2 kHz | EN 60068-2-6 |
Feature | Order data | Specifications | Additional information |
---|---|---|---|
Design | AL | rectangular | |
F | round | only with E16 type of connection | |
Type of connection | BE15 | M8 plug | for AP10S and AP20S |
E16 | tab connector | for MA503/2 and MA504/1 | |
Cable length | C... | 00.2 ... 10.0 in m | only with connection type E16 |
... | 00.5 ... 02.5 m, in intervals of 0.5 m | only with connection type E15 | |