Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Magnetic sensor LEC160

Incremental, digital or analog interface, very small design

Profile LEC160:

  • Repeat accuracy max. ±1 μm
  • Max. resolution 0.1 µm (LD output circuit)
  • Reading distance 0.1 … 0.8 mm
  • Works with MB160 magnetic tape
  • Signal period 1600 μm
  • Output circuit sin/cos or LD
  • Function and status display LEDs


Inquire about product/Add to leaflet
Mechanical data
FeatureTechnical dataAdditional information
Housingzinc die-cast
Sensor/band reading distance0.1 … 0.8 mm O, I reference signal
0.1 … 0.5 mm R reference signal
0.4 … 0.6 mm FR reference signal
Cable sheathPUR, suitable for drag-chain use 8-core ø4.3-0.4 mm
Cable bending radius5x cable diameter static
10x cable diameter dynamic
Weight<0.03 kg

(without cable); cable 0.028 kg/m

Electrical data
Sin/cos output
FeatureTechnical dataAdditional information
Operating voltage5 V DC ±5 %
Current consumption<35 mA off-load
<50 mA

loaded

Status display2 LEDs (yellow, green)
Output signals

sin, /sin, cos, /cos, index, /index

Output voltage1 VPP ±10 %

at 0 ... 70° C, 120 Ω teminal resistance

Signal period1600 µm
Offset voltageUB/2 ±100 mV

sine/cosine mean to GND (5 V DC)

Phasing90°±1°, ±3° (20 kHz) sin/cos
45°

sin (reference signal)

135° cos (reference signal)
Pulse width of reference signal180°±40°
Real-time requirement

speed-proportional signal output

Type of connection

open cable end

LD output circuit
FeatureTechnical dataAdditional information
Operating voltage5 V DC ±5 %
Current consumption<50 mA off-load
<120 mA loaded
Status display2 LEDs (yellow, green)
Output circuitLD (RS422)
Output signalsA, /A, B, /B, I, /I, R, /R, FR, /FR
Output signal level high>2.5 V
Output signal level low<0.5 V
Latency1.5 µs
Pulse width of reference signal1, 2, 4 increment(s)
Type of connectionopen cable end
Signal pattern, Sin/Cos output
E: reference voltage 5 V
F: 1 VSS ±10 %
L: 180° ±40 %
M: 90° ±1.0° / ±3° (25 kHz)
X: 1 VSS
Signal pattern, LD output circuit

Hint The logic status of signals A and B is not defined regarding the reference signal FR. It may deviate from the signal pattern.

Hint Reference or index signal with 4 increments (360°) signal length is only valid from the 5th counting step onwards. A corresponding delay should be taken into consideration after switching on the operating voltage.

Pulse interval, LD output circuit
System data
FeatureTechnical dataAdditional information
Resolution0.1, 0.2, 0.5, 1, 2, 5, 10 µm LD output circuit LD output circuit
Linearity deviation±3 µm
Repeat accuracy ±1 µm at 0.3 mm reading distance
Measuring range
Travel speed≤25 m/s Sin/Cos output, referencing speed ≤5 m/s
≤25 m/s LD output circuit, see table,referencing speed ≤5 m/s
Travel speed, LD output circuit
  Travel speed Vmax [m/s]
Resolution [µm] 0.1 0.80 0.40 0.32 0.16 0.08 0.04
0.2 1.60 0.80 0.64 0.32 0.16 0.08
0.5 4.00 2.00 1.60 0.80 0.40 0.20
1 8.00 4.00 3.20 1.60 0.80 0.40
2 16.00 8.00 6.40 3.20 1.60 0.80
5 25.00 20.00 16.00 8.00 4.00 2.00
10 25.00 25.00 25.00 16.00 8.00 4.00
Pulse interval [μs] 0.10 0.20 0.25 0.50 1.00 2.00
Counting frequency [kHz] 2500.00 1250.00 1000.00 500.00 250.00 125.00
Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature-40 … 85 °C
Storage temperature-40 … 85 °C
Relative humidity100 % condensation admissible
EMCEN 61326-1 immunity requirement of industry
EN 61000-6-2 class B emission limit
Protection categoryIP60 EN 60529
Shock resistance≤500 m/s2, 11 ms EN 60068-2-27, half-sine, 3 axes (+/-), each 3 pulses
Vibration resistance≤100 m/s2, 10 … 2000 Hz EN 60068-2-6, 3 axes, each 10 cycles
Magnetic sensor LEC160
Pin assignment
Signal Sin/CosSignal LDCable color
Sin A red
Cos /A yellow
FR FR blue
+UB +UB brown
GND GND black
/Sin B orange
/Cos /B green
/FR /FR violet
Hint for mounting

For systems with reference points on the magnetic tape, please take care that sensor and tape are correctly aligned (cf. picture).

Reference signalFRRO, I
A, sensor/tape reading distance 0.4 … 0.6 mm 0.1 … 0.5 mm 0.1 … 0.8 mm
B, lateral offset ±0.5 mm ±0.5 mm ±0.5 mm
C, alignment error ±3° ±3° ±3°
D, longitudinal inclination ±1° ±1° ±1°
E, lateral inclination ±3° ±3° ±3°

LEC160 Hint for mounting
Symbolic representation

Scope of delivery
  • LEC160
  • Quick Start Guide
Ordering table
Feature Order data Specifications Additional information
Cable length
A...
00.5, 01.0, 02.0, 03.0 in m
 
Output circuit
B1Vss
Sin/Cos, 1 VSS
LD
Line Driver
 
Reference signal
CO
without
FR
flexible reference
 
Resolution
D
no information requiredonly with 1Vss output circuit
...
0.1, 0.2, 0.5, 1, 10, 2, 5 in µm
 
Pulse interval
E
no information requiredonly with 1Vss output circuit
...
0.1, 0.2, 0.5, 1.0, 2.0 in µs
 
Ordering key
LEC160
-
MF
-
E1
-
A
-
B
-
C
-
D
-
E
additional accessoriesOrdering key
Flexible reference mark89976

share me

Contact

Anita Senentz

Anita Senentz
Scan the code with a suitable APP to include the contact into your phone.

Download vCard