Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Wire-actuated encoder SGH25

Position sensor for hydraulic cylinders with measuring lengths up to 2500 mm

open expert video
Absolute wire-actuated sensor for position measurement and speed measurement in hydraulic cylinders, telescopic cylinders, and piston accumulators. Durable, reliable, and easy to integrate, based on over 30 years of experience in wire-actuated sensor technology.

Profile SGH25:

  • Measuring range 0 … 2500 mm (98.42 inches)
  • Absolute measuring system
  • Pressure-resistant up to 350 bar, pressure peaks up to 450 bar
  • High degree of flexibility, adjustable to all measuring lengths thanks to teach-in 
  • Redundant interfaces available
  • Safety version usable up to Perfomace Level d
  • Analog, CANopen, SAE J1939, CANopen Safety interfaces

Add to leaflet
Mechanical data
FeatureTechnical dataAdditional information
Flangealuminum

sealing ring (PUR)

Housing

synthetic

POM

Wire designø0.45 mm steel rope (stainless)
Extension force≥3.9 N
Acceleration≤24 m/s2
Weight~0.35 kg
Electrical data
Analog interface
FeatureTechnical dataAdditional information
Operating voltage9 … 32 V DC with output 0 ... 5 V, 0.5 ... 4.5 V, 0.25 ... 4.75 V, 1.0 ... 4.9 V, reverse polarity protected
12 … 32 V DC with output 0 … 10 V, reverse polarity protected
12 … 32 V DC

with output 0 ... 20 mA, 4 ... 20 mA, but UB > Uload + 2.0 V, reverse polarity protected

24 V DC ±20 % Industrie Hydraulik, nur bei CE, verpolsicher
Current consumption<40 mA without load
<80 mA bei 12 V DC je Geber
Power input<1 W

without load

Digital inputs2 limit inputs
4 Limit Eingänge (redundant)
Input signal level high>8.4 V
Input signal level low<2.8 V
Output voltage0 … 10 V load current <10 mA
0 … 5 V load current <10 mA
0.5 … 4.75 V load current <10 mA
0.25 … 4.75 V load current <10 mA
1 … 4.9 V load current <10 mA
Output current0 … 20 mA load ≤500 Ω
4 … 20 mA

load ≤500 Ω

Linearity tolerance±0.25 % 1000 mm measurement length
Settling time<150 ms
Type of connectionplug connection system KV1H accessory
CANopen interface
FeatureTechnical dataAdditional information
Operating voltage10 … 32 V DC reverse polarity protected
24 V DC ±20 % Industrie Hydraulik, nur bei CE, verpolsicher
Current consumption<40 mA bei 24 V DC
<80 mA bei 12 V DC
Power input<1 W
Linearity tolerance±0.25 % 2500 mm Messlänge
Interface

according to ISO 1189, not isolated

CANopen, CIA 406, CIA 301, CIA 305
Addressadjustable per SDO or Layer Setting Service (LSS)
Baud rate20 kBit/s
50 kBit/s
125 kBit/s
250 kBit/s
500 kBit/s
800 kBit/s
1 MBit/s
Cycle time<1.5 ms
Starting time<150 ms
Type of connectionplug connection system KV1H accessory
Schnittstelle CANopen Safety
FeatureTechnical dataAdditional information
Operating voltage9 … 32 V DC verpolsicher
24 V ±20% Industrie Hydraulik, nur bei CE, verpolsicher
Current consumption<40 mA bei 24 V DC
<80 mA bei 12 V DC
Power input<1 W
Linearity tolerance±0.25 % 2500 mm Messlänge
Interfacegemäß ISO 11898, nicht getrennt CANopen, CIA 406, CIA 301, CIA 305
Addresseinstellbar per SDO oder Layer Setting Service (LSS)
Baud rate20 kBit/s
50 kBit/s
125 kBit/s
250 kBit/s
500 kBit/s
800 kBit/s
1 MBit/s
Cycle time<1.5 ms
Starting time<150 ms
Type of connectionSteckverbindungssystem Zubehör KV1H
System data
FeatureTechnical dataAdditional information
Scanning

magnetic

Resolution12 Bit

analog output

0.1 mm CANopen, SAE J1939, CANopen Safety
Repeat accuracy ±0.15 mm unidirektional
Measuring range0 … 2500 mm measuring range flexibly usable between 0...2500 mm Messbereich flexibel nutzbar zwischen 0 … 2500 mm
Travel speed≤2 m/s
Failure rate290 year(s)

analog output, at 60 °C (MTBF)
EN/IEC61709 (SN29500)

240 year(s)

CANopen, at 60 °C (MTBF)
EN/IEC61709 (SN29500)

540 year(s) Analog nicht redundant, bei 40 °C (MTBF) EN/IEC61709 (SN29500)
460 year(s) CAN nicht redundant, bei 40 °C (MTBF) EN/IEC61709 (SN29500)
170 year(s) CAN Safety redundant, bei 40 °C (MTBF) EN/IEC61709 (SN29500)
Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature-40 … 105 °C

electronics

-30 … 105 °C

mechanics

Storage temperature-40 … 85 °C
Relative humidity100 % condensation admissible in the mounted and plugged condition
Operating pressure<350 bar
Overload pressure<450 bar
EMCEN 61326-1

immunity requirement of industry, class B emission limit

Protection categoryIP67 EN 60529, verbaut mit KV1H und geeignetem Gegenstecker

IP69K

built in the cylinder (IP69K), with KV1H and suitable mating connector

Wire-actuated encoder SGH25
Ordering table
Feature Order data Specifications Additional information
Measuring range
A...
1500, 2000, 2500 in mm
 
Ambient conditions
BMH
Mobil Hydraulik
CE
Industrie Hydraulik
 
Interface
C0/5V
0 … 5 VSpannungsausgang
0/10V
0 … 10 VSpannungsausgang
0.25/4.75V
0.25 … 4.75 VSpannungsausgang
0.5/4.5V
0.5 … 4.5 VSpannungsausgang
1.0/4.9V
1.0 … 4.9 VSpannungsausgang
0/20mA
0 … 20 mAStromausgang
4/20mA
4 … 20 mAStromausgang
CAN
CANopen
CANs
CANopen Safety
 
Redundant
DNR
nicht redundant
R
redundant
 
Ordering key

SGH25 - A - GW6 - B - C - D - M1 - DS - S

share me

Contact

Anja Wickersheim

Anja Wickersheim
Scan the code with a suitable APP to include the contact into your phone.

Download vCard