Country: USA
Languages:

Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com

Subsidiary: SIKO Products Inc. 2155 Bishop Circle E Dexter, MI 48130 USA Phone+1 (734) 426-3476 sales.us@siko-global.com

Electronic position indicator DE04

Freely programmable

The DE04 is a freely programmable and battery-powered position indicator. The position indicator DE04 provides maximum flexibility, since the always same basic device can be parameterized to the desired spindle pitch, display accuracy and reading position in an application-specific manner. Parameterization is conveniently performed via programming software via an external interface.

Profile DE04:

Freely programmable electronic digital display for length or angular measurement
Freely programmable via the ProToolDE programming software
Hollow shaft, max. Ø 14 mm
LCD display with 5 digits and special characters
Digit height approx. 8 mm
Reset, incremental measurement, offset via keyboard
Long battery life
Easy battery change without dismantling of the device

Inquire about product/Add to leaflet

Mechanical data

Feature	Technical data	Additional information
Shaft	black-finished steel (supported in friction bearings)	(≤ ø16H7)
Housing	plastic
Speed	≤600 rpm	(100 % ED)
Weight	~0.05 kg

Electrical data

Feature	Technical data	Additional information
Battery	lithium coin cell, 3 V, CR2032 type	~2-year service life
	lithium coin cell, 3 V, CR2477 type	~8-year service life
Display/display range	5-digit LCD 7-segment, ~8 mm height	-19999 ... 99999

Ambient conditions

Feature	Technical data	Additional information
Ambient temperature	-10 … 60 °C
Storage temperature	-30 … 80 °C
EMC	EN 61000-6-2	interference resistance / immission
	EN 61000-6-4	emitted interference / emission
Protection category	IP51	EN 60529
Shock resistance	300 m/s², 15 ms	EN 60068-2-27
Vibration resistance	100 m/s², 5 … 150 Hz	EN 60068-2-6
	200 m/s², 100 Hz … 2 kHz	EN 60068-2-6

Scope of delivery

DE04
Mounting instructions

Ordering table

Ordering information

Please note that the value displayed (=measured value per revolution / display divisor) must be at least 2!

Feature	Order data	Specifications	Additional information
Mounting position*	A02	horizontal spindle
	04	vertical spindle

Measured value per revolution*	B...	00002 ... 90000	see calculation of value displayed
	W3600	angle mode 0° ... 360°, resolution 0.1°	only with comma position "1"
	Z3600	angle mode -180° ... +180°, resolution 0.1°	only with comma position "1"

Decimal place*	C0	0 = 00000
	1	1 = 0000.0
	2	2 = 000.00
	3	3 = 00.000

Display divisor*	D...	1, 10, 100, 1000	see calculation of value displayed
Display divisor*
Counting direction*	Ei	clockwise ascending values
	e	counter-clockwise ascending values

Key pad operation	FD	direct zeroing*
	V	zeroing delayed by 5 s*
	K	only incremental measurement function
	OF	without function keys

Hollow shaft/diameter	G14	ø14 mm
	16	ø16 mm
	...	RH6, RH8, RH9.525, RH10, RH12	reducing bushes

Color	HO	orange RAL 2004
	S	black RAL 9005

Battery	IB2	~2 years service life
Battery	B8	~8 years service life	observe technical drawing