Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com
| Feature | Technical data | Additional information |
|---|---|---|
| Shaft | black-finshed steel | |
| Housing | reinforced plastic | |
| Speed | ≤600 rpm | W01 shaft design |
| ≤6000 rpm | W02, W04 shaft design | |
| Moment of inertia | ~10.5 x 10-6 kgm2 | W01 shaft design |
| ~9.5 x 10-6 kgm2 | W02 shaft design | |
| ~9 x 10-6 kgm2 | W04 shaft design | |
| Starting torque | ≤15 Ncm at 20 °C | W01 shaft design |
| ≤1.5 Ncm at 20 °C | W02, W04 shaft design | |
| Shaft load rating | 10 N axial | W01 shaft design |
| 20 N radial | W01 shaft design | |
| 25 N axial | W02, W04 shaft design | |
| 50 N radial | W02, W04 shaft design | |
| Cable sheath | PVC or PUR | |
| Weight | ~0.14 kg |
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 10 … 30 V DC | reverse polarity protected |
| Current consumption | typical <50 mA | without load (AB0 output signals) |
| Output signal level high | UB -2 V, at 20 mA | |
| Output signal level low | ≤1 V at 20 mA | |
| Pulse frequency | ≤25 kHz | |
| Phasing | 90° ±30° | |
| Load | ±40 mA short-circuit proof | max. adm. |
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 10 … 30 V DC | reverse polarity protected |
| Current consumption | typically <50 mA | without load (AB0 output signals) |
| Output signal level high | wiring-dependent | |
| Output signal level low | ≤0.1 V DC | |
| Pulse frequency | ≤25 kHz | |
| Phasing | 90° ±30° | |
| Load | ±50 mA | max. adm. |
| Feature | Technical data | Additional information |
|---|---|---|
| Ambient temperature | 0 … 60 °C | |
| Storage temperature | -20 … 80 °C | |
| Protection category | IP54 | EN 60529 |
| Shock resistance | 2000 m/s2, 6 ms | EN 60068-2-27 |
| Vibration resistance | 100 m/s2, 50 Hz | EN 60068-2-6 |
The max. permissible pulses/revs. must not be exceeded by the output signals.
| Feature | Order data | Specifications | Additional information |
|---|---|---|---|
| Output signals | A... | AXX, ABX, AB0, ABI | |
| Pulses/revolution | B... | 1, 2, 5, 10, 20, 25, 36, 40, 50, 60, 70, 80, 100, 125, 150, 180, 200, 220, 240, 250, 300, 360, 400, 500, 600, 1000, 1024 | |
| others on request | |||
| Cable sheath | CPUR | PUR, oil-resistant | |
PVC | PVC | ||
| Type of connection | DE1 | open cable end | |
E6 | cable coupler with cable extension | ||
E6X | cable coupler | ||
| Cable length L | E... | 00.3, 02.0 ... 40 m, in intervals of 1 m | only PVC |
... | 00.3, 02.0, 03.0 | only PUR | |
| Cable length L2 | F... | 00.3, 02.0 ... 15 m, in intervals of 1 m | only PVC |
... | 00.3, 02.0, 03.0 | only PUR | |
| Mounting type | G1 | with blind borehole | |
2 | with mounting plate | ||
| Output circuit | HPP | push-pull | |
OC | open collector | ||
| Shaft design | IW01 | setscrew/friction bearing | |
W02 | clamping ring/ball bearing | ||
W04 | setscrew/ball bearing | ||
| Hollow shaft/diameter | J20 | 20 mm | with W01 |
... | 14, 15 mm | with W02 | |
... | 10, 12 mm | with W04 | |
Inclinometer IK360L
Absolute encoder WV3600MOR
Absolute encoder WH3600M
Positioning drive AG06 Fieldbus
Magnetic sensor MSA213K
Handwheel KHB13
Draw-Wire Encoder NEO Series
Absolute encoder AH3650M
Absolute encoder WH3600MR
Cable extension KV03S0
Draw-Wire Encoder SGH10L
Absolute encoder WV3600MO
Magnetic band MBA
Magnetic band MB2000
Absolute encoder WH5850
Absolute encoder WH3650M
Extension Board IK1
Control knob DK02
Programming Tool AIF01
Electronic position indicator AP05
Analog position indicator SZ80/1
Magnetic sensor MSK320R
Programming software ProTool DL
Programming Tool PT232
Programming Tool ProTool SGH
Electronic display MA508/1
Setpoint display AP10T
(1.08 MB)
