Country: Saudi Arabia
Languages:

Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com

Geared potentiometer GP02

Compact design with through hollow shaft

Through hollow shaft Ø 14 mm
Adaptation to various measurement distances owing to a wide range of gear ratios
Compact, low-cost design
Potentiometer or power output
Easy mounting

Inquire about product/Add to leaflet

Feature	Technical data	Additional information
Shaft	black-finished steel
Housing	plastic
Gear ratio	0.2 … 128
Speed	≤500 rpm	depending on the transmission
Potentiometer service life	1 x 10⁶ revolution(s)

Feature	Technical data	Additional information
Power rating	1 W at 70 °C	≤30 V
Resistance	1, 5, 10 kΩ
Resistance tolerance	±10 %
Standard terminal resistance	0.5 %
Linearity tolerance	±1 %
Design	hybride

Feature	Technical data	Additional information
Power rating	2 W at 70 °C	≤30 V
Resistance	1, 5, 10 kΩ
Resistance tolerance	±5 %
Standard terminal resistance	0.2 %
Linearity tolerance	±0.25 %
Design	wire

Feature	Technical data	Additional information
Power rating	2 W at 70 °C	≤30 V
Resistance	1, 5, 10 kΩ
Resistance tolerance	±5 %
Standard terminal resistance	0.2 %
Linearity tolerance	±0.25 %
Design	hybride

Feature	Technical data	Additional information
Power rating	2 W at 70 °C	≤30 V
Resistance	5 kΩ
Resistance tolerance	±5 %
Standard terminal resistance	0.2 %
Linearity tolerance	±0.1 %
Design	hybride

Feature	Technical data	Additional information
Operating voltage	24 V DC ±20 %
Output current	4 … 20 mA	with ≤500 Ω load

Feature	Technical data	Additional information
Measuring range	340° ±5° (mechanical full-length)	potentiometer type 01
	3600° +10°	potentiometer types 02, 03, 03/0.1

Feature	Technical data	Additional information
Ambient temperature	0 … 80 °C
Relative humidity		condensation inadmissible
EMC	EN 61000-6-2	interference resistance / immission
	EN 61000-6-4	emitted interference / emission
Protection category	IP52	EN 60529

Signal	Cable color
I+	brown
I-	white

Feature	Order data	Specifications	Additional information
Gear ratio	A...	0.2, 0.25, 0.333, 0.5, 1, 2, 3, 4, 6, 7, 9, 10, 12, 16, 20, 20.3636, 24, 28, 30, 36, 48, 68, 112, 128
		others on request

Torque pin/form	BA	form A, cylindrical pin
	B	form B, for tolerance compensation

Potentiometer type	C01	1 helix, hybrid
	02	10 helices, wire
	03	10 helices, hybrid
	03/0.1	10 helices, hybrid, linear tolerance ±0.1 %	only at resistance 5

Resistance	D1	potentiometer 1 kΩ
	5	potentiometer 5 kΩ
	10	potentiometer 10 kΩ

Transducer	Emit	with	only only for resistance 10 and potentiometer type 02 or 03
		without

Sense of rotation	F	no information required	only for resistance 1, 5, 10
	e	counter-clockwise ascending values	only for MWI analog output
	i	clockwise ascending values	only for MWI analog output

Cable length	G...	00.2 ... 15.0 m, in intervals of 1 m