Feature | Order data | Specifications | Additional information |
Gear ratio | A... | 0.184, 0.27, 0.361, 0.740, 1, 2, 2.503, 3.048, 4, 5.213, 6, 8.003, 10, 12, 15.238, 20, 24.167, 40.034, 45.494, 53.333, 58.333, 76.190, 100.392, 150.036 | |
| others on request | |
|
Torque pin/form | BA | form A, cylindrical pin | |
B | form B, for tolerance compensation | |
|
Potentiometer type | C01 | 1 helix, hybrid | |
02 | 10 helices, wire | |
03/0.1 | 10 helices, hybrid, linear tolerance ±0.1 % | |
|
Analog output | DMWI | transducer 4 … 20 mA | |
MWU | transducer 0 … 10 V | |
P01 | potentiometer 1 kΩ | |
P05 | potentiometer 5 kΩ | |
P10 | potentiometer 10 kΩ | |
|
Sense of rotation | E | no information required | only for P01, P05, or P10 analog output |
e | counter-clockwise ascending values | only for MWI or MWU analog output |
i | clockwise ascending values | only for MWI or MWU analog output |
|
Type of connection | FE1 | open cable ends | |
E12 | connector, M12 | |
|
Cable length | G... | 00.3 ... 20.0 m, in intervals of 0.1 m | |
|
Protection category | HIP52 | IP52 | |
IP65 | IP65 | |
IP68 | IP68 | with oil filling, against condensation |
|
Number of revolutions | I | no information required, adjustable by customer | except with IP68 |
... | 0.17, 0.25, 0.333, 0.6, 1, 2.5, 4, 5, 10, 12, 20, 24, 40, 60, 75, 100 | only with IP68 type of protection and analog output MWI, MWU |
| others on request | only with IP68 type of protection and analog output MWI, MWU |
|