Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Subsidiary: SIKO Products Asia Pte Ltd 158 Kallang Way, #03-641, Performance Building Singapore 349245 Singapore Phone+65 62979733

Draw-Wire Encoder SG62

robust design and redundant sensor system with 6000 mm measuring length

Very robust wire-actuated encoder in compact design for numerous areas of application including crane construction, stage construction, warehousing technology, etc., up to a measuring length of 6000 mm, with signal output in redundant design.

Profile SG62:

  • Robust design
  • Measuring lengths up to 6000 mm
  • Analogue signal output in redundant design (2x 4…20 mA or potentiometer)
  • Very robust measuring rope (stainless steel)
  • IP65 protection class
  • M12 plug connection
Functional Safety PLd analog

Inquire about product/Add to leaflet

Technical data

Mechanical data
FeatureTechnical dataAdditional information
Housing

aluminum/plastics

Wire designø0.54 mm

rustproof stainless steel

Extension force≥8 N

on the rope

Measured distance/ rope drum revolution200 mm
Weight~0.8 kg
Electrical data
Encoder potentiometer
FeatureTechnical dataAdditional information
Operating voltage≤30 V DC

power dissipation on potentiometer <1 W

Power rating2 W

at 70 °C

Resistance10 kΩ
Resistance tolerance±5 %
Standard terminal resistance0.5 % or 1 Ω

the higher value always applies

Linearity tolerance±0.25 %
Type of connection

M12 plug connector (A-coded)

8-pole, 1x pin

Transducer, power output
FeatureTechnical dataAdditional information
Operating voltage10 … 30 V DC

with load impedance ≤500 Ω voltage between I+ and I-

Output current4 … 20 mA

(2x)

4/20mA 4/20mA
20 … 4 mA

(2x)

20/4mA 20/4mA
4 ... 20 mA, 20 ... 4 mA 4/20mA 20/4mA
Type of connection

M12 plug connector (A-coded)

8-pole, 1x pin

Measurement transducers permit optimum adjustment of the output current and output voltage to the measuring range. The measurement transducer is pre-set at the works so that an output signal of 4 … 20 mA or 20 … 4 mA is available. 

System data
FeatureTechnical dataAdditional information
Repeat accuracy ±0.25 mm

per starting direction

Measuring range5000 mm

, 6000 mm

Travel speed≤800 mm/s
Failure rate166.7 year(s)

at 60 °C (MTBF)

Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature-40 … 80 °C
Relative humidity

condensation inadmissible

EMC

EN 61000-6-2

interference resistance / immission

EN 61000-6-4

emitted interference / emission

Protection category

IP65 (for electronic unit)

EN 60529, certonal-coated electronic unit

Technical drawing

Draw-Wire Encoder SG62

Additional information

Pin assignment
Potentiometer pin assignment
SignalPINAdditional information
Po 1 Potentiometer 1
Po 2 Potentiometer 2
S 3 Potentiometer 2
Pe 4 Potentiometer 2
nc 5  
Pe 6 Potentiometer 1
S 7 Potentiometer 1
nc 8  
Transducer pin assignment
SignalPinAdditional information
I+ 1 Transducer 1
I+ 2 Transducer 2
nc 3  
I- 4 Transducer 2
nc 5  
I- 6 Transducer 1
nc 7  
nc 8  
Hint for mounting

When securing the wire it must be ensured that the wire is straight and vertical in relation to the wire outlet.  Recommendation: Only select the starting position after an unwound length of approx. 5 mm. This prevents the wire hitting the end stop when it is rewound. 

SG62 Hint for mounting
Symbolic representation

Scope of delivery
  • SG62
  • Mounting instructions

Ordering table

Ordering table
Feature Order data Specifications Additional information
Measuring range
A...
5000, 6000 in mm
 
Rope fixture
BGW
wire suspension with thread
HK
wire suspension with hook
 
Encoder type
CP10_P10
2x potentiometer 10 kΩ
4/20mA_4/20mA
2x transducer 4…20 mA
20/4mA_20/4mA
2x transducer 4…20 mA
4/20mA_20/4mA
2x transducer 4…20 mA, counter-rotating
 
Position of electrical connection
D1
direction of wire outlet
3
opposite the wire outlet
 
Series impedance
E0
0 Ω
1k2
1.2 kΩ
 
Ordering key
SG62
-
A
-
B
-
S/FLEX
-
C
-
D
-
E