Select your country

Country: Turkey
Languages:

Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com

Wire-actuated encoder SG10

Small design with 2000 mm measurement length

Miniature wire-actuated encoder for capturing measurement distances with a maximum measuring length of 2000 mm.

Profile SG10:

Compact design
Universally applicable thanks to standardized interfaces
Easy mounting
Measurement lengths up to max. 2000 mm
Potentiometer, voltage, power output or incremental encoder
Housing made of reinforced plastic

Inquire about product/Add to leaflet

Mechanical data

Feature	Technical data	Additional information
Housing	reinforced plastic
Wire design	ø0.45 mm	steel wire (stainless), plastic coated
Extension force	≥2 N
Measured distance/ rope drum revolution	100 mm
Cable length	≤30 m	P10 + MWI encoder type
	≤20 m	MWU encoder type
Weight	~0.2 kg

Electrical data

Encoder potentiometer

Feature	Technical data	Additional information
Power rating	1.5 W at 70 °C
Resistance	10 kΩ
Resistance tolerance	±5 %
Linearity tolerance	±0.25 %
	±0.1 %	encoder type MWI/0,1

Transducer, power output

Feature	Technical data	Additional information
Operating voltage	24 V DC ±20 %	at ≤500 Ω load
Output current	4 … 20 mA

Transducer, voltage output

Feature	Technical data	Additional information
Operating voltage	15 … 28 V DC	at 3 mA, no load
Output voltage	0 … 10 V DC
Load	≤15 mA

Measurement transducers permit optimum adjustment of the output current and output voltage to the measuring range. The measurement transducer is pre-set at the works so that an output signal of 4 … 20 mA (MWI) or 0 … 10 V DC (MWU) is available.

System data

Feature	Technical data	Additional information
Repeat accuracy	±0.15 mm
Travel speed	≤800 mm/s

Ambient conditions

Feature	Technical data	Additional information
Ambient temperature	-10 … 80 °C	without transducer
	0 … 50 °C	with transducer
Protection category	IP50 (encoder part potentiometer)	EN 600529
	IP54 (incremental)	EN 600529

Pin assignment

Potentiometric outputs P10

Signal	E1 (terminal)
Po	brown
Pe	white
S	green

MWI transducer

Signal	Cable color
I+	brown
I-	white

MWU transducer

Signal	Cable color
+24 V DC	brown
GND	white
U_out	green

Hint for mounting

When securing the wire it must be ensured that the wire is straight and vertical in relation to the wire outlet. Recommendation: Only select the starting position after an unwound length of approx. 5 mm. This prevents the wire hitting the end stop when it is rewound.

symbolic depiction

Scope of delivery

SG10

Ordering table

Ordering information

For measuring range 2000 I, the rotary encoder IV2800 mounted directly from the factory must be ordered separately.

Feature	Order data	Specifications	Additional information
Measuring range	A...	300, 500, 1000 in mm	encoder types Ω, I, U (potentiometer and transducer)
	2000I		only with encoder type S5, S5R

Encoder type	BP10	potentiometer with 10kΩ
	MWI	transducer 4 … 20 mA
	MWU	transducer 0 … 10 V
	S5	rotary encoder IV2800, axial cable outlet
	S5R	rotary encoder IV2800, radial cable outlet
		others on request

Cable length	C0.5	0.5 m	with encoder type P10 or MWI/MWU
	...	1 ... 20 m, in steps of 1 m	with encoder type P10 or MWI/MWU
	IG	specified via mounted encoder	at measuring range 2000 I

Ordering key

SG10

-

A

-

B

-

C

Accessories

Electronic display MA50

Guide roller UR

share me

Downloads

Leaflet

Product comparison

Product inquiry

Contact

Melanie Augustin

: International, Scandinavia, Lithuania, Estonia, Latvia, Russia, Turkey, Asia, Australia, New Zealand
Phone:: +49 7661 394-415
: export.scandinavia@siko-global.com

Scan the code with a suitable APP to include the contact into your phone.

Download vCard