Signal | Cable color E1 | PIN E12 |
---|---|---|
Po | white | 1 |
S | green | 2 |
Pe | brown | 3 |
nc | - | 4 |
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 [email protected]
Adaptation to various measurement distances owing to a wide range of gear ratios
Integrated slip clutch to protect the potentiometer
Feature | Technical data | Additional information |
---|---|---|
Shaft | stainless steel | |
Housing | zinc die-cast | |
Gear ratio | 0.2 … 244 | |
Speed | ≤500 rpm | depending on transmission |
Shaft load rating | ≤400 N | radial |
≤150 N | axial | |
Potentiometer service life | 1 x 106 revolution(s) |
Feature | Technical data | Additional information |
---|---|---|
Power rating | 1 W at 70 °C | ≤30 V |
Resistance | 1, 5, 10 kΩ | |
Resistance tolerance | ±10 % | |
Standard terminal resistance | 0.5 % | |
Linearity tolerance | ±1 % | |
Design | hybride |
Feature | Technical data | Additional information |
---|---|---|
Power rating | 2 W at 70 °C | ≤30 V |
Resistance | 1, 5, 10 kΩ | |
Resistance tolerance | ±5 % | |
Standard terminal resistance | 0.2 % | |
Linearity tolerance | ±0.25 % | |
Design | wire |
Feature | Technical data | Additional information |
---|---|---|
Power rating | 2 W at 70 °C | ≤30 V |
Resistance | 1, 5, 10 kΩ | |
Resistance tolerance | ±5 % | |
Standard terminal resistance | 0.2 % | |
Linearity tolerance | ±0.1 % | |
Design | hybride |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | 24 V DC ±20 % | |
Output current | 4 … 20 mA | at ≤500 Ω load |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | 24 V DC ±20 % | |
Output voltage | 0 … 10 V |
Feature | Technical data | Additional information |
---|---|---|
Measuring range | 340° ±5° (mechanical full-length) | potentiometer type 01 |
3600° +10° | potentiometer types 02, 03/0.1 |
Feature | Technical data | Additional information |
---|---|---|
Ambient temperature | -20 … 80 °C | without oil fill |
-10 … 80 °C | with oil fill | |
Relative humidity | condensation inadmissible | |
EMC | EN 61000-6-2 | interference resistance / immission |
EN 61000-6-4 | emitted interference / emission | |
Protection category | IP52, IP65, IP68 | EN 60529 |
Feature | Order data | Specifications | Additional information |
---|---|---|---|
Gear ratio | A... | 0.184, 0.27, 0.361, 0.740, 1, 2, 2.503, 3.048, 4, 5.213, 6, 8.003, 10, 12, 15.238, 20, 24.167, 40.034, 45.494, 53.333, 58.333, 76.190, 100.392, 150.036 | |
others on request | |||
Torque pin/form | BA | form A, cylindrical pin | |
B | form B, for tolerance compensation | ||
Potentiometer type | C01 | 1 helix, hybrid | |
02 | 10 helices, wire | ||
03/0.1 | 10 helices, hybrid, linear tolerance ±0.1 % | ||
Analog output | DMWI | transducer 4 … 20 mA | |
MWU | transducer 0 … 10 V | ||
P01 | potentiometer 1 kΩ | ||
P05 | potentiometer 5 kΩ | ||
P10 | potentiometer 10 kΩ | ||
Sense of rotation | E | no information required | only for P01, P05, or P10 analog output |
e | counter-clockwise ascending values | only for MWI or MWU analog output | |
i | clockwise ascending values | only for MWI or MWU analog output | |
Type of connection | FE1 | open cable ends | |
E12 | connector, M12 | ||
Cable length | G... | 00.3 ... 20.0 m, in intervals of 0.1 m | |
Protection category | HIP52 | IP52 | |
IP65 | IP65 | ||
IP68 | IP68 | with oil filling, against condensation | |
Number of revolutions | I | no information required, adjustable by customer | except with IP68 |
... | 0.17, 0.25, 0.333, 0.6, 1, 2.5, 4, 5, 10, 12, 20, 24, 40, 60, 75, 100 | only with IP68 type of protection and analog output MWI, MWU | |
others on request | only with IP68 type of protection and analog output MWI, MWU | ||
additional accessories | Ordering key |
---|---|
Mating connector, 4-pole, socket | 83526 |