Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Electronic display MA10/4

Incremental or absolute, length, angle, speed or number of pieces measurement

Freely programmable measurement display for the representation of incremental and absolute position values. The alpha-numeric display enables the precise representation of measured values as well as the freely selectable representation of length and angle units.

Profile MA10/4:

  • High-contrast LCD (1 line of 12 digits)

  • Display of units
  • Inputs for incremental or absolute encoder (SSI),
  • Free programming via front keyboard
  • With reference connection
  • Option: RS232 or RS485 interface
  • Option: Switching outputs

Add to leaflet
Mechanical data
FeatureTechnical dataAdditional information
Housing

plastic, with panel- cip as snap module

switchboard cutout 92+0.8 x 45+0.6 IEC 61554

Weight0.22 kg 24 V DC
0.46 kg 230 V AC / 115 V AC / 24 V AC / 15 V AC
Electrical data
FeatureTechnical dataAdditional information
Operating voltage24 V DC ±20 %
24 V AC ±10 %
115 V AC ±10 %

(EG design)

230 V AC ±10 %

(EG design)

Current consumption120 mA

at 24 V DC, without encoder

Encoder supply24 V DC (200 mA)
5 V DC (200 mA)
Encoder input frequency≤500 kHz
Encoder inputPP, OC, OP, LD/5, LD/24, SSI/5, SSI/24

length and angle measurement

DREH/PP, DREH/OC

speed measurement

S/PP, S/OC

number of pieces measurement

Pulse analysis

4-fold

incremental encoder

Display/display range

12-digit, LCD point matrix, backlit

arithmetic sign, unit of measurement

-9999999 … 9999999
Keys

membrane keys with pressure point

Switching outputs≤30 V, 100 mA OC

2 freely programmable outputs

Counter capacity

±223 increments

Type of connection

connector

13/26-pole

Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature0 … 50 °C
Storage temperature-20 … 85 °C
Relative humidity condensation inadmissible
EMCEN 61000-6-2 interference resistance / immission
EN 61000-6-4

emitted interference / emission

Protection category

IP40 whole device

EN 60529

IP60 front with switchboard installation

EN 60529
Electronic display MA10/4
Pin assignment
Signal incremental
PP, OC, OP, LD5, LD24
Signal Speed / quantity
Dreh/PP, Dreh/OC, S/PP, S/OC
Signal absolute
SSI/5, SSI/24
PIN
+Ub Encoder supply +Ub Encoder supply +Ub Encoder supply 1
A A Clock+ 2
B nc Data+ 3
Index signal nc nc 4
GND, Shield encoder supply GND, Shield encoder supply GND, Shield encoder supply 5
24 V DC out 24 V DC out 24 V DC out 6
RFS RFS CAL 7
nc nc nc 8
GND GND GND 9
nc nc nc 10
PE PE PE 11
0 V GND 0 V GND 0 V GND 12
+ Ub Operating voltage + Ub Operating voltage + Ub Operating voltage 13
Encoder supply Encoder supply Encoder supply 14
/A (LD, OP) nc Clock- 15
/B (LD, OP) /I (LD, OP) Data- 16
/I (LD, OP) nc nc 17
GND GND GND 18
nc nc nc 19
GND GND GND 20
nc nc nc 21
DÜA/TXD/A1 DÜA/TXD/A1 DÜA/TXD/A1 22
DÜB/RXD/A2 DÜB/RXD/A2 DÜB/RXD/A2 23
nc nc nc 24
nc nc nc 25
nc nc nc 26
Scope of delivery
  • MA10/4
Ordering table
Feature Order data Specifications Additional information
Operating voltage
A1
230 V AC
2
115 V AC
3
24 V AC
4
24 V DC
 
Encoder input
BPP
Push-Pull
OC
open collector
OP
PP inverted
LD/5
Line Driver, 5 V DC encoder supply
LD/24
Line Driver, 24 V DC encoder supply
SSI/5
SSI, 5 V DC encoder supply
SSI/24
SSI, 24 V DC encoder supply
DREH/PP
Speed, Push-Pull
DREH/OC
Speed, Open Collector
S/PP
Piece number, Push-Pull
S/OC
Piece number, Open Collector
 
Counting frequency
C25
25 khz
250
250 khz
500
500 khz
 
Switching output
DSO
without
SM
with
 
Interface/protocol
EXX/XX
without
S1/00
RS232/standard
S3/00
RS485/standard
 
Software
FS
Length measurement
SW02
Angle measurement, 0 … 360°
 
Ordering key

MA10/4 - EG - A - B - C - D - RM - E - BS - F