Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Electronic control knob DKE01

Freely programmable

Reach for the stars! The innovative adjusting knob DKE01 combines a programmable electronic position indicator with a star grip or disk handwheel to offer a flexibly usable positioning unit. The indicated values can be configured application-specifically to cover the most varied areas of use with always the same basic device.

Profile DKE01:

  • Turning knob with integrated 5-digit LCD display

  • Digit height approx. 11,5 mm
  • Freely programmable via the ProToolDE programming software
  • Usable for length or angle measurement
  • Shaft accommodation: max. Ø 20 mm
  • Long battery life
  • With disk handwheel as an option

Inquire about product/Add to leaflet

Technical data

Mechanical data
FeatureTechnical dataAdditional information
Shaft

black-finished steel (supported in friction bearings)

Housing

plastic

Speed≤200 rpm
Weight~0.25 kg
Electrical data
FeatureTechnical dataAdditional information
Battery

lithium coin cell, 3 V, CR2477 or CR2477N types

~8-year service life

Display/display range

5-digit LCD 7-segment, ~11.5 mm height

-19999 ... 99999
Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature-10 … 60 °C
Storage temperature-30 … 80 °C
Relative humidity condensation inadmissible
Protection categoryIP65 EN 60529

Technical drawing

Electronic control knob DKE01

Additional information

Display divisor

Hint Please note that the value displayed (=measured value per revolution / display divisor) must be at least 2!

Scope of delivery
  • DKE01

Ordering table

Ordering table
Feature Order data Specifications Additional information
Handwheel
AST
star knob
HS
disk hand wheel
 
Measured value per revolution*
B...
00002 ... 90000 see calculation of displayed value
W3600
angle mode 0-360°, resolution 0.1°only with decimal place "1"
Z3600
angle mode -180 … +180°, resolution 0.1°only with decimal place "1"
 
Decimal place*
C0
0 = 00000
1
1 = 0000.0
2
2 = 000.00
3
3 = 00.000
 
Display divisor*
D...
1, 10, 100, 1000 see calculation of displayed value
 
Counting direction*
Ei
clockwise ascending values
e
counter-clockwise ascending values
 
Key pad operation*
FD
reset direct
V
reset 5 sec. delayed
 
Hollow shaft/diameter
G20
ø20 mm
...
RH8, RH10, RH12, RH14 reducing bushes
others on request
 
Torque pin/position
HI
28.5 mm
II
30.0 mm
 
Torque pin/position
I270
see drawingonly with position I
90
see drawingonly with position II
 

*Programmable via ProTool DE programming software

Ordering key
DKE01
-
A
-
B
-
C
-
D
-
E
-
F
-
G
-
H
-
I