Type | øD | ødv | ødx | ød1 | ød2 | a | b | c | e | GfG | Suitable for |
---|---|---|---|---|---|---|---|---|---|---|---|
KHB9 | 87 | 5.8 | 16 | 32 | 63 | 54 | 17 | 21 | 20 | M6 | S50/1 |
KHB13 | 130 | 6.8 | 26 | 42 | 98.2 | 66 | 24 | 28.5 | 24 | M8 | S80/1; SZ80/1 |
KHB15 | 150 | 6.8 | 26 | 42 | 101 | 70 | 27 | 30.5 | 28 | M10 | S80/1; SZ80/1 |
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com
Feature | Technical data | Additional information |
---|---|---|
Material | plastic | hub of hot-dip steel |
Weight | 0.16 kg | KHB9 |
0.35 kg | KHB13 | |
0.43 kg | KHB15 |
Type | øD | ødv | ødx | ød1 | ød2 | a | b | c | e | GfG | Suitable for |
---|---|---|---|---|---|---|---|---|---|---|---|
KHB9 | 87 | 5.8 | 16 | 32 | 63 | 54 | 17 | 21 | 20 | M6 | S50/1 |
KHB13 | 130 | 6.8 | 26 | 42 | 98.2 | 66 | 24 | 28.5 | 24 | M8 | S80/1; SZ80/1 |
KHB15 | 150 | 6.8 | 26 | 42 | 101 | 70 | 27 | 30.5 | 28 | M10 | S80/1; SZ80/1 |
ødv =
d prebored
; ødx =d max.
; GfG =Thread for handle
Handwheel type | KHB9 | KHB13 / KHB15 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bore dH7 | 6 … 8 | 9, 10 | 11, 12 | 13, 14 | 15, 16 | 7, 8 | 9, 10 | 11, 12 | 13 … 17 | 18 … 20 | 21 … 24 | 25, 26 |
Groove width with keyhole JS9 | 3 | 4 | 3 | 4 | 5 | 6 | ||||||
Pin hole | 3.8/8 | 3.8/8 | 3.8/8 | 4.8/8 | 3.8/12 | 3.8/12 | 3.8/12 | 4.8/12 | 4.8/12 | 4.8/12 | ||
Hub thread without keyhole JS9 | M4/8 | M4/8 | M4/8 | M6/8 | M4/12 | M4/12 | M4/12 | M6/12 | M6/12 | M6/12 | ||
Hub thread with keyhole JS9 | M3/8 | M3/8 | M3/12 | M3/12 | M4/12 | M5/12 |
Texts highlighted in orange color are ordering features
Feature | Order data | Specifications | Additional information |
---|---|---|---|
handwheel type | A9 | KHB9 | |
13 | KHB13 | ||
15 | KHB15 | ||
Bore diameter | B5.8 | prebored | only with KHB9 |
6.8 | prebored | only with KHB13, KHB15 | |
... | 6 ... 26 mm, in steps of 1 mm | see Table of dimensions, maximum value ødx | |
Feather key groove | COP | without keyway | |
JS9 | light seat | according to DIN 6885/1 T1 | |
Pinhole | DOS | without pin hole | |
… | diameter "øl"/measure "f" (e.g. 3.8/12) | see table Special processing, depending on the handwheel type, only if keyway is "OP", only if hub thread is "ONG" | |
others on request | |||
Hub thread | EONG | without hub thread | |
… | thread "n"/measure "f" (e.g. M4/12) | see table Special processing, depending on the handwheel type, only if pin hole is "OS" | |
others on request | |||
Position indicator | FPM | position indicator mounted | separate ordering of a position indicator required! |
PS | position indicator separate | separate ordering of a position indicator required! | |
Tapered hub | GOAN | without turned hub | |
others on request | only with KHB9 | ||