E: Reference voltage 2.5 V
F: 1 VSS ±10 %
J: ≥0.2 V
K: ≥0.3 V
L: 100° ±20 %
M: 90° ±1.0° / ±3° (25 kHz)
X: 1 VSS
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 [email protected]
Subsidiary: SIKO Italia S.r.l. Via Trento, 33 20017 Rho (MI) Italy Phone+39 (02) 93906329 [email protected]
Works with MB100/1 magnetic tape
Works with MBR100 magnetic tape ring
Feature | Technical data | Additional information |
---|---|---|
Housing | zinc die-cast/aluminum | M design |
zinc die-cast | ZM design | |
Sensor/band reading distance | 0.1 … 0.4 mm | reference signal O, IA, ID |
0.1 … 0.2 mm | reference signal RB, RD | |
Sensor/ring reading distance | 0.1 … 0.4 mm | reference signal O, IA, ID |
0.1 … 0.2 mm | reference signal RB, RD | |
Cable sheath | PUR, suitable for drag-chain use | 6, 8-wire ø5-0.4 mm |
Cable bending radius | 5x cable diameter | static |
7.5x cable diameter | dynamic | |
Service life of cable | >5 million cycles | under the following test conditions: travel range 4.5 m travel speed 3 m/s acceleration 5 m/s2 ambient temperature 20 °C ±5 °C |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | 10.5 … 30 V DC | reverse polarity protected |
5 V DC ±5 % | no reverse polarity protection | |
Current consumption | <25 mA | at 24 V DC |
<50 mA | at 5 V DC | |
Output signals | sin, /sin, cos, /cos, index, /index | |
Output voltage | 1 VPP ±10 % | at 0 ... 70 °C, 120 Ω teminal resistance |
Output impedance | 0 Ω (RLoad >75 Ω) | short-circuit proof |
Signal period | 1000 µm | |
Offset voltage | 2.5 V, ±100 mV | sine/cosine mean to GND (10.5 ... 30 V DC) |
UB/2 ±100 mV | sine/cosine mean to GND (5 V DC) | |
Phasing | 90°±1°, ±3° (20 kHz) | sin/cos |
45° sin/cos | reference signal is symmetric around the positive intersection point of the sin/cos signals (phase 45°) | |
Real-time requirement | speed-proportional signal output | |
Type of connection | open cable end | |
plug connector | 7/8-pole |
Feature | Technical data | Additional information |
---|---|---|
Linearity deviation | ±2 µm | at TU = 20° C, reading distance 0.2 mm |
Repeat accuracy | 1 µm | |
Measuring range | ∞ | |
Circumferential speed | ≤20 m/s | sin/cos |
Travel speed | ≤20 m/s | sin/cos |
Feature | Technical data | Additional information |
---|---|---|
Ambient temperature | -10 … 70 °C | |
Storage temperature | -30 … 80 °C | |
Relative humidity | 100 % | condensation admissible |
EMC | EN 61000-6-2 | interference resistance / immission |
EN 61000-6-4 | emitted interference / emission | |
Protection category | IP67 | EN 60529 |
Shock resistance | 500 m/s2, 11 ms | EN 60068-2-27 |
Vibration resistance | 200 m/s2, 50 Hz … 2 kHz | EN 60068-2-6 |
Signal | E1 | E6X |
---|---|---|
GND | black | 1 |
sin | red | 2 |
/sin | orange | 3 |
cos | yellow | 4 |
/cos | green | 5 |
+UB | brown | 6 |
nc | 7 |
Signal | E1 | E6X |
---|---|---|
sin | red | 1 |
cos | yellow | 2 |
index | blue | 3 |
+UB | brown | 4 |
GND | black | 5 |
/sin | orange | 6 |
/cos | green | 7 |
/index | violet | 8 |
Reference signal | O, I | R |
---|---|---|
A, Sensor/tape reading distance | ≤0.4 mm | ≤0.2 mm |
B, Lateral offset | ±2 mm | ±0.5 mm |
C, Alignment error | ±3° | ±3° |
D, Longitudinal inclination | ±1° | ±1° |
E, Lateral inclination | ±3° | ±3° |
Feature | Order data | Specifications | Additional information |
---|---|---|---|
Operating voltage | A10 | 10.5 … 30 V DC | |
5 | 5 V DC ±5 % | ||
Design | BM | metal housing with status LEDs | |
ZM | metal housing without status LEDs | ||
Type of connection | CE1 | open cable end | |
E6X | bullet connector without mating connector | ||
cable extension on request | |||
Cable length | D... | 1 ... 20 m, in steps of 1 m | |
others on request | |||
Reference signal | EO | without | |
IA | periodic index (analog) | index signal every 1 mm | |
ID | periodic index (digital) | index signal every 1 mm | |
RB | fixed, tape side (analog) | ||
RD | fixed, tape side (digital) | ||