E: reference voltage 2.5 V
F: 1 VSS ±10%
M: 90° ±1.0° / ±3° (25 kHz)
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com
Feature | Technical data | Additional information |
---|---|---|
Housing | zinc die-cast | |
Sensor/band reading distance | ≤0.8 mm | |
Cable length | 1 … 20 m | (connection type E1) |
Cable sheath | PUR, suitable for drag-chain use | 10-core ø5.5-0.4 mm (E1, twisted in pairs) |
Cable bending radius | 28 mm | static |
42 mm | dynamic | |
Service life of cable | 5 million cycles | under the following test conditions: Travel distance 4.5 m Travel speed 3 m/s Acceleration 5 m/s2 Ambient temperature 20° C ± 5° C |
Weight | ~0.05 kg | without cable |
Feature | Technical data | Additional information |
---|---|---|
Operating voltage | 4.5 … 30 V DC | reverse polarity protected (SSI + BISS/C) |
7.5 … 30 V DC | reverse polarity protected (IOL) | |
Current consumption | <200 mA | |
Status display | RGB-LED | plausibility error, distance warning, device status |
Output circuit | without, LD, 1Vss | |
Interface | SSI, BiSS C, IO Link | |
Real-time requirement | speed-proportional signal output | Sin/Cos output |
Type of connection | open cable end | (SSI + BISS/C) |
M12 connector (A-coded) | 4-pole, 1x pin (IOL) |
Feature | Technical data | Additional information |
---|---|---|
Pole length | 2 mm | incremental |
Resolution | 1 µm | absolute |
1, 5, 10 µm | LD, incremental | |
2 mm | period length, 1Vpp | |
Linearity deviation | ±10 µm | |
Repeat accuracy | ±1 µm | |
Measuring range | ≤16000 mm | |
Travel speed | ≤5 m/s | absolute |
≤25 m/s | incremental |
Travel speed Vmax [m/s] | |||||||
---|---|---|---|---|---|---|---|
Resolution [µm] | 1 | 10.00 | 5.00 | 2.00 | 1.00 | 0.50 | 0.20 |
5 | 25.00 | 25.00 | 10.00 | 5.00 | 2.50 | 1.00 | |
10 | 25.00 | 25.00 | 20.00 | 10.00 | 5.00 | 2.00 | |
Pulse interval [μs] | 0.10 | 0.20 | 0.50 | 1.00 | 2.00 | 5.00 | |
Counting frequency [kHz] | 2500.00 | 1250.00 | 500.00 | 250.00 | 125.00 | 50.00 |
Feature | Technical data | Additional information |
---|---|---|
Ambient temperature | -40 … 80 °C | |
Storage temperature | -40 … 80 °C | |
Relative humidity | 100 % | condensation admissible |
EMC | EN 61326-1 | industry immunity requirement, class B emission limit |
Protection category | IP67 | EN 60529 |
Shock resistance | ≤500 m/s2, 11 ms | EN 60068-2-27, half-sine, 3 axes (+/-), each 3 pulses |
Vibration resistance | ≤100 m/s2, 10 … 2000 Hz | EN 60068-2-6, 3 axes, each 10 cycles |
SSI | BiSS C | Cable color |
---|---|---|
GND | GND | black |
+UB | +UB | bown |
nc | nc | red |
nc | nc | yellow |
nc | nc | orange |
nc | nc | green |
T+ | MA | blue |
T- | NMA | violet |
D+ | SLO | gray |
D- | NSLO | white |
Signal | PIN |
---|---|
L+ (+UB) | 1 |
I/Q | 2 |
L- (GND) | 3 |
C/Q | 4 |
SSI | BiSS C | Cable color |
---|---|---|
GND | GND | black |
+UB | +UB | brown |
A, Sin+ | A, Sin+ | red |
/A, Sin- | /A, Sin- | yellow |
B, Cos+ | B, Cos+ | orange |
/B, Cos- | /B, Cos- | green |
T+ | MA | blue |
T- | NMA | violet |
D+ | SLO | gray |
D- | NSLO | white |
Process Data | Smart Value | Smart Function |
---|---|---|
Actual position | -- | Plausibility monitoring |
A, Sensor/tape reading distance | ≤0.8 mm |
B, Lateral offset | ±0.6 mm |
C, Alignment error | ±1° |
D, Longitudinal tilt | max. sensor/tape A reading distance must never be exceeded. |
E, Lateral tilt | max. sensor/tape A reading distance must never be exceeded. |
Feature | Order data | Specifications | Additional information |
---|---|---|---|
Type of connection | AE1 | open cable end | only with SSI, BISS/C |
E12X | plug outlet with cable | only with IO-link | |
Cable length | B... | 01.0 ... 20.0 m, in intervals of 1 m | only at E1 |
00.3 | 0.3 m | only at E12X | |
others on request | |||
Interface | CBiSS/C | BiSS C | only at E1 |
SSI | RS422 | only at E1 | |
Output circuit | D1Vss | Sin/Cos | only at E1 |
LD | Line Driver (RS422) | only at E1 | |
O | without | ||
Incremental resolution | E... | 1, 5, 10 in µm | only with LD |
no information required | |||
Pulse interval | F... | 0.1, 0.2, 0.5, 1, 2, 5 in µs | only with LD |
no information required | |||