Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Subsidiary: SIKO Products Inc. 2155 Bishop Circle E Dexter, MI 48130 USA Phone+1 (734) 426-3476

Actuator AG06 Fieldbus

Fieldbus

Compact and powerful actuator for automated positioning jobs.

Profile AG06 Fieldbus:

  • easy mounting, no additional coupling needed
  • stainless steel hollow shaft, glass fibre reinforced casing
  • brushless 24 VDC motor with long service life

  • solid absolute sensor, magnetic sensing technology
  • 2-line LCD for target and position value and operating keys
  • 2 LEDs for user guidance

  • integrated RS485 or CANopen interface

  • Integrated positioning controller
  • M8 + M12 component mounting technology
SIKONETZ5 SIKONETZ5

Add to leaflet
Mechanical data
FeatureTechnical dataAdditional information
Shaftstainless steel
Housing

glass-fiber reinforced plastic

Clamping ringstainless steel
Torque pinstainless steel
Nominal torque/rated speed7 Nm at 30 rpm ±10 % i = 188
13 Nm at 15 rpm ±10 %

i = 368 (14 Nm temporarily adm. break-away torque)

Operating mode

S3 intermittent duty: 25 % DC, 10 min.

EN 60034-1
Weight~0.9 kg
Electrical data
FeatureTechnical dataAdditional information
Operating voltage24 V DC ±10 %

reverse polarity protected, output stage

24 V DC ±10 %

reverse polarity protected, control

Current consumption2.42 A

max. adm. at set point 100% (output stage)

Power input~48 W output stage
Battery

CR2477N, 3 V lithium, 950 mAh

Battery service life~5 year(s)

depending on environmental conditions

Rated current2.2 A ±10 %

at max. adm. torque (output stage)

<60 mA

at 24 V DC (control)

Display/display range

5-digit LCD 7-segment, ~7 mm height

decimal points, 2 rows, special characters

Special character

battery, direction arrows

Status display

two LEDs

Keys

parameterizing, resetting, inching, setpoint definition

Bus connectionRS485; CANopen

no galvanic isolation

Type of connection

1x M12-plug connector (A-coded)

4-pole, 1x pin

2x M8 plug connectors

4-pole, 1x socket, 1x pin

grounding via flat connector 6.3 mm

System data
FeatureTechnical dataAdditional information
Resolution720 increments/revolution

shaft

Repeat accuracy ±1 increment(s)
Travel range±697 revolution(s) i = 188
±356 revolution(s) i = 368
Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature0 … 45 °C
Storage temperature-20 … 60 °C
Relative humidity condensation inadmissible
EMC

EN 61800-3, second environment

interference resistance / immission
EN 61800-3, C3

emitted interference / emission

Protection categoryIP54, IP65

EN 60529, mating connectors mounted

Shock resistance500 m/s2, 11 ms EN 60068-2-27
Vibration resistance<100 m/s2, 5 … 150 Hz EN 60068-2-6
Actuator AG06 Fieldbus
Pin assignment
Operating voltage (A-coded)
SignalPIN
+24 V  Output stage1
+24 V Control2
GND Output stage*3
GND Control*4
Interfaces M8
SignalPIN
DÜB/TxRX-/CANL1
DÜA/TxRX+/CANH2
Do not connect!3
SGND*4
Performance curve
Scope of delivery
  • AG06 Fieldbus
  • Mounting instructions
  • Documentation on CD
Ordering table
Feature Order data Specifications Additional information
Gear ratio
A188
i = 188
368
i = 368
 
Protection category
BIP54
IP54
IP65
IP65
 
Shaft design/diameter
CKR/20
clamping ring, ø20 mm
others on request
 
Interface/protocol
DS3/09
RS485/SIKONETZ5
CAN
CANopen
 
Ordering key

AG06 Fieldbus - A - 50W - B - C - B - ABM - D - SW

additional accessoriesOrdering key
Mating connector, Fieldbus IN, 4-pole, socket84209
Mating connector, Fieldbus OUT,

4-pole, pin

84210
Mating connector, voltage supply, 4-pole, angle socket83091
Bus terminating connector, Fieldbus,

4-pole, pin

BAS-0005