Type | øD | ødv | ødx | ød1 | ød2 | a | b | c | e | Suitable for |
---|---|---|---|---|---|---|---|---|---|---|
HST7 | 78 | 5.8 | 20 | 32 | 60 | 50 | 20 | 15 | 20 | S50/1 |
HST8 | 75 | 5.8 | 12 | 20 | 60 | 43 | 10 | 10 | 13 | S50/1 |
HST11 | 110 | 6.8 | 16 | 30 | 95 | 56 | 14 | 17 | 22 | S80/1; SZ80/1 |
Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0 info@siko-global.com
Feature | Technical data | Additional information |
---|---|---|
Material | aluminum | |
Weight | 0.2 kg | HST7 |
0.2 kg | HST8 | |
0.5 kg | HST11 |
Type | øD | ødv | ødx | ød1 | ød2 | a | b | c | e | Suitable for |
---|---|---|---|---|---|---|---|---|---|---|
HST7 | 78 | 5.8 | 20 | 32 | 60 | 50 | 20 | 15 | 20 | S50/1 |
HST8 | 75 | 5.8 | 12 | 20 | 60 | 43 | 10 | 10 | 13 | S50/1 |
HST11 | 110 | 6.8 | 16 | 30 | 95 | 56 | 14 | 17 | 22 | S80/1; SZ80/1 |
ødv =
d prebored
; ødx =d max.
Handwheel type | HST7 | HST8 | ||||||
---|---|---|---|---|---|---|---|---|
Bore dH7 | 6 … 8 | 9, 10 | 11, 12 | 13 … 16 | 17 … 20 | 6 … 8 | 9, 10 | 11, 12 |
Groove width with keyway JS9 | 3 | 4 | 5 | 3 | ||||
Pin hole | 3.8/10 | 3.8/10 | 3.8/10 | 4.8/10 | 4.8/10 | 3.8/6 | 3.8/6 | 3.8/6 |
Hub thread without keyway JS9 | M4/10 | M4/10 | M4/10 | M6/10 | M6/10 | M4/6 | M4/6 | M4/6 |
Hub thread with keyway JS9 | M3/10 | M3/10 | M4/10 |
Handwheel typ | HST11 | ||||
---|---|---|---|---|---|
Bore dH7 | 7, 8 | 9, 10 | 11, 12 | 13 … 15 | 16 |
Groove width with keyway JS9 | 3 | 4 | 5 | 5 | |
Pin hole | 3.8/12 | 3.8/12 | 3.8/12 | 4.8/12 | 4.8/12 |
Hub thread without keyway JS9 | M4/12 | M4/12 | M4/12 | M6/12 | M6/12 |
Hub thread with keyway JS9 | M3/12 | M3/12 | M4/12 |
Texts highlighted in orange color are ordering features
Feature | Order data | Specifications | Additional information |
---|---|---|---|
handwheel type | A7 | HST7 | |
8 | HST8 | ||
11 | HST11 | ||
Surface | BB | unpainted | |
CS | plastic-coated, black matt | not with HST7 | |
others on request | |||
Bore diameter | C5.8 | prebored | only with HST7, HST8 |
6.8 | prebored | only with HST11 | |
... | 6 ... 20 mm, in steps of 1 mm | see Table of dimensions, maximum value ødx | |
Feather key groove | DOP | without keyway | |
JS9 | light seat | according to DIN 6885/1 T1 | |
P9 | tight fit | according to DIN 6885/1 T1 | |
Pinhole | EOS | without pin hole | |
… | diameter "øl"/measure "f" (e.g. 3.8/12) | see table Special processing, depending on the handwheel type, only if keyway is "OP", only if hub thread is "ONG" | |
others on request | |||
Hub thread | FONG | without hub thread | |
… | thread "n"/measure "f" (e.g. M4/12) | see table Special processing, depending on the handwheel type, only if pin hole is "OS" | |
others on request | |||
Tapered hub | GOAN | without turned hub | |
others on request | |||
Position indicator | HPM | position indicator mounted | separate ordering of a position indicator required! |
PS | position indicator separate | separate ordering of a position indicator required! | |