Headquarters: SIKO GmbH Weihermattenweg 2 79256 Buchenbach Germany Phone+49 7661 394-0

Geared potentiometer GP04/1

With solid or blind hole shaft

Profile GP04/1:

  • Extremely resistant to external influences
  • Solid or blind-hole hollow shaft, max. Ø 20 mm
  • Adaptation to various measurement distances owing to a wide range of gear ratios

  • Integrated slip clutch to protect the potentiometer

  • Potentiometer, power or voltage output
  • IP65 protection class

Inquire about product/Add to leaflet

Technical data

Mechanical data
FeatureTechnical dataAdditional information
Shaft

aluminum

IP52

black-finished steel

IP65
Housing

aluminum

Gear ratio0.2 … 256
Speed≤500 rpm

depending on the transmission

Shaft load rating≤1000 N radial
≤1700 N axial
Potentiometer service life1 x 106 revolution(s)
Electrical data
Encoder potentiometer type 01,1 helix
FeatureTechnical dataAdditional information
Power rating1 W at 70 °C ≤30 V
Resistance5, 10 kΩ
Resistance tolerance±10 %
Standard terminal resistance0.5 %
Linearity tolerance±1 %
Designhybride
Encoder potentiometer type 02,10 helices
FeatureTechnical dataAdditional information
Power rating2 W at 70 °C ≤30 V
Resistance1, 5, 10 kΩ
Resistance tolerance±5 %
Standard terminal resistance0.5 %
Linearity tolerance±0.25 %
Design

wire

Encoder potentiometer type 03, 10 helices
FeatureTechnical dataAdditional information
Power rating2 W at 70 °C ≤30 V
Resistance1, 5, 10 kΩ
Resistance tolerance±5 %
Standard terminal resistance0.5 %
Linearity tolerance±0.25 %
Designhybride
Transducer, power output
FeatureTechnical dataAdditional information
Operating voltage24 V DC ±20 %
Output current4 … 20 mA

at ≤500 Ω load

Transducer, voltage output
FeatureTechnical dataAdditional information
Operating voltage24 V DC ±20 %
Output voltage0 … 10 V
System data
FeatureTechnical dataAdditional information
Measuring range340° ±5°

(mechanical full-length)

potentiometer type 01
3600° +10°

potentiometer types 02, 03

Ambient conditions
FeatureTechnical dataAdditional information
Ambient temperature-20 … 80 °C
Relative humidity condensation inadmissible
EMCEN 61000-6-2 interference resistance / immission
EN 61000-6-4

emitted interference / emission

Protection categoryIP52, IP65 EN 60529

Technical drawing

Geared potentiometer GP04/1

Additional information

Pin assignment
Without transducer
SignalTerminal
Po1
Pe2
S3
MWI transducer
SignalTerminal
I+ 1
I- 2
nc 3
MWU transducer
SignalTerminal
+24 V DC 1
GND 2
Uout 3
Scope of delivery
  • GP04/1
  • Mounting instructions

Ordering table

Ordering table
Gear ratio calculation
Feature Order data Specifications Additional information
Gear ratio
A...
0.1, 0.166, 0.25, 0.333, 0.5, 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 24, 30, 40, 55
others on request
 
Drive shaft
BH/20
hollow shaft ø20 mm
H/16
hollow shaft ø16 mm
V/20
solid shaft ø20 mm
V/16
solid shaft ø16 mm
 
Potentiometer type
C01
1 helix, hybridonly for P05 or P10 analog output
02
10 helices, wire
03
10 helices, hybrid
 
Analog output
DMWI
transducer 4 … 20 mA
MWU
transducer 0 … 10 V
P01
potentiometer 1 kΩ
P05
potentiometer 5 kΩ
P10
potentiometer 10 kΩ
 
Sense of rotation
E
no information requiredonly for P01, P05, or P10 analog output
e
counter-clockwise ascending valuesonly for MWI or MWU analog output
i
clockwise ascending valuesonly for MWI or MWU analog output
 
Protection category
F52
IP52
65
IP65
 
Ordering key
GP04/1
-
A
-
B
-
C
-
D
-
E
-
F

Accessories